GCD-AE-Serie LVDT-Wegaufnehmer

---

Eigenschaften

• Hermetically sealed housing
• 25 µ-inch [0.6 µm] repeatability
• IEC IP68 rating to 1,000 PSI [70 bars]
• Long strokes up to ±1 inch
• Resistant to harsh environments
• MS type connector (MIL-C-5015)
• Long cycle life

---

About the GCD-AE Series Air extend DC operated gage heads

The GCD-AE Series heavy-duty DC operated gage heads enable high performance in environments containing moisture, dirt, and fluid contaminants. These Gage heads are air-extend, spring-retract LVDTs (Linear Variable Differential Transformers) with precision linear bearings and internal conditioning electronics. Operating on a nominal ±15VDC supply, the GCD-AE Series delivers an extremely linear, low noise ±10VDC output.

These robust gage heads allow measurements over stroke ranges from ±0.05 inch [±1.27mm] up to ±1 inch [±25.4mm]. A removable blackchromed, hardened tool steel tip is threaded (4-48UNF-2A) to the working end. Internal construction prevents the core and shaft from rotating as they move longitudinally. The integral electrical connector (welded) provides for easy installation and allows replacing a damaged cable without sacrificing the sensor. Installation and adjustment are facilitated by an external ½-20 mounting thread and the two locknuts
supplied with each unit.

The ruggedness, long life cycle, and very high reliability of the GCD-AE Series provide a low cost of ownership over the life of the equipment onto which they are installed. The one-piece front end (barrel which contains
the bearing assembly), machined from solid stainless steel bar, coupled with a bronze bushing, has far greater resistance to bending forces and side loads compared to other designs. This is particularly important on the longer stroke versions; it reduces the common risk of probe damage/bending during installation or maintenance of industrial equipment. The GCD-AE Series designs also require fewer parts and weld joints, thereby increasing overall structural integrity and reliability.

Other features GCD-AE Series

• Air extend, spring retract
• All-welded stainless steel construction
• Calibration certificate supplied with each unit
• Hardened tool steel contact tip
• High side load resistance
• CE compliant

Applications for GCD-AE Series

• Factory automation
• Industrial printing equipment
• Steel mills
• Metal thickness gaging
• Environments requiring hermetically sealed transducers
• In-process measurements (feedback loop with PLC or CNC controller)