ASC CS-1711LN Current Output Accelerometer
Uniaxial MEMS based acceleration sensor with a built-in voltage to current converter
About the ASC CS-1711LN Current Output Accelerometer
The accelerometers of the ASC CS series are based on proven MEMS technology with a capacitive operating principle. The integrated electronic circuitry enables a single-ended analog current output of 4-20 mA and flexible power supply voltage from 8 to 30 VDC. The models of the ASC CS series feature broadband noise of <0.65 µA and are used in applications that are requiring extremely long cables (>100 m) or very high EMC immunity.
The sensor ASC CS-1711LN features a lightweight, reliable aluminum housing with protection class IP67 and an integrated cable with configurable length and connectors.
Due to their loss-free signal transmission, even in the case of very long cables, the sensors of the ASC CS series are used in continuous condition monitoring and structural health monitoring (SHM), such as infrastructure monitoring in rail transport or structural analysis of bridges.
Key features ASC CS-1711LN Current Output Accelerometer
- Uniaxial
- MEMS Capacitive
- Measurement Range: ±2 to ±50 g
- Output Signal: 4-20 mA
- Frequency Range (±5 %): DC to 2000 Hz
- Aluminum Housing
- Made in Germany
- Low Noise Current Output
- Loss-free Signal Transmission
- Very High EMC Immunity
- DC Response, Gas damped
- High Shock Resistance
- Excellent Offset and Scale Factor Stability
Options ASC CS-1711LN Current Output Accelerometer
- Customized Cable Length
- Customized Connector
Applications ASC CS-1711LN Current Output Accelerometer
- Structural Health Monitoring
- Infrastructure Monitoring
- Renewable Energy and Industrial Applications
Avez-vous besoin de ce capteur pour votre prochain projet?
Demandez un devis sans engagement ou envoyez-nous vos coordonnées pour une consultation gratuite et sans engagement. Nos ingénieurs commerciaux vous contacteront dans un délai maximum de 1 à 2 jours ouvrables.
Téléchargements de produits
Parlez à nos experts
Vous ne trouvez pas exactement ce que vous cherchez ? Nous proposons des capteurs et des systèmes de mesure standard, mais nous pouvons également vous aider à concevoir un capteur sur mesure ou une solution de mesure complète. N'hésitez pas à nous contacter pour obtenir des conseils ou un devis.
Parler à un expertSpécifications techniques
| Spécifications | Valeur |
|---|---|
| Frequency response range (±3 db) hz | 0 to 525, 0 to 800, 0 to 1100, 0 to 2100 |
| Measurement range g | ±2, ±5, ±10, ±50 |
| Noise density µg/√hz | 10, 15, 20, 100 |
| Operating temperature range °c | -20 to +70 |
| Power supply voltage v | 8 to 30 |
| Protection class | IP67 |
| Scale factor (sensitivity) ma/g | 4.0,1.6, 0.8, 0.16 |
Produits apparentés
Besoin d'autre chose?
ASC CS-1511LN Current Output Accelerometer
- Measurement Range: ±2 to ±50 g
- Output Signal: 4-20 mA
- Frequency Range (±5 %): DC to 2000 Hz
ASC CS-1611LN Current Output Accelerometer
- Measurement Range: ±2 to ±50 g
- Output Signal: 4-20 mA
- Frequency Range (±5 %): DC to 2000 Hz
ASC OS-325MF-PG MEMS Capacitive Accelerometer
- MEMS Capacitive
- Measurement Range: ±2 to ±200 g
- Noise Density: 10 to 680 µg/√Hz