ASC 74C1 Piezoresistive Accelerometer
Triaxial, small and compact acceleration sensor for testing light weight structures
About the ASC 74C1 Piezoresistive Accelerometer
The accelerometers are based on an advanced piezoresistive MEMS technology and can be used in a low frequency response up from 0Hz. The piezoresistive sensor element is made of monolithic resistors. These resistors are attached to carrier-elements and are electrically connected in a Wheatstone bridge. The electrical signal changes proportional to the vibration.
The model ASC 74C1 is a triaxial accelerometer based on piezoresistive technology. Each axis is working independently as a 4-wire system. The ASC 74C1 is a small and compact accelerometer. The housing is a flat design in hard anodised aluminium.
The compact cube form facilitates mounting on different sites. Due to their low mass these sensor models are ideal for testing on light-weight structures. The sensing element in the models has integrated overload stops and therefore the silicon chip is highly shock resistant. The sensors have an excellent non-linearity over a wide frequency response. Electrically they are configured as a full Wheatstone bridge.
The models can be obtained with all common sensor ID modules. A very high flexible cable provides a simple mounting. The ASC 74C1 is equipped as standard with 6 meter of rugged Polyurethane cable.
Key features ASC 74C1
- Triaxial
- Wheatstone Bridge
- mV Output
- Aluminium Housing
- Made in Germany
- Range: 500g, 1000g and 2000g
- Small Size
- Light Weight
- DC Response
- ±5000g Shock Resistance
- Gas Damped
Options ASC 74C1
- Customised Cable Length
- Customised Connector
- TEDS Module
- Shunt Resistor
- Equipment Exchange (EQX)
Applications ASC 74C1
- Automotive Crash Testing
- Shock Testing
Avez-vous besoin de ce capteur pour votre prochain projet?
Demandez un devis sans engagement ou envoyez-nous vos coordonnées pour une consultation gratuite et sans engagement. Nos ingénieurs commerciaux vous contacteront dans un délai maximum de 1 à 2 jours ouvrables.
Téléchargements de produits
Parlez à nos experts
Vous ne trouvez pas exactement ce que vous cherchez ? Nous proposons des capteurs et des systèmes de mesure standard, mais nous pouvons également vous aider à concevoir un capteur sur mesure ou une solution de mesure complète. N'hésitez pas à nous contacter pour obtenir des conseils ou un devis.
Parler à un expertSpécifications techniques
Spécifications | Valeur |
---|---|
Amplitude non-linearity (% fso) | ±1 |
Excitation voltage (v dc) | 3 to 10 |
Frequency response: ±5% | 2500 Hz |
Operating temperature range (°c) | -20 to +80 |
Range (±g) | 500 | 1000 | 2000 |
Resonance frequency (khz) | 15 | 15 | 26 |
Sensitivity (mv/g) | 0.4 | 0.15 | 0.13 |
Shock limit (±g) | 5000 |
Weight (gram, without cable) | 16 |
Produits apparentés
Besoin d'autre chose?
ASC 75C1 Piezoresistive Accelerometer
- Range: 500g, 1000g and 2000g
- Small Size
- Light Weight
ASC 76C1 Piezoresistive Accelerometer
- Aluminium Housing
- Made in Germany
- Range: 500g, 1000g and 2000g