AAA215 | AAA220 Servo Accelerometers
Gravity referenced linear servo acceleration sensor with pivot-on-stone
About the AAA215 | AAA220 Servo Accelerometers
The AAA200 Series of Servo Accelerometers measure vector acceleration with high accuracy using a closed loop force balance torquer mechanism.
All AAA200 Series Accelerometers operate as a closed-loop torque balance servo system. With reference to the illustration below the pendulous mass ‘A’ develops a torque proportional to the product of its mass unbalance and the applied acceleration. The movement of mass ‘A’ is detected by position sensor ‘B’ whose output signal is connected to an amplifier. The resulting current is fed into the torquer motor ‘C’ which then develops a torque exactly equal to, but directly opposed to the initial torque from the pendulous mass ‘A’. Mass ‘A’ stops moving, assuming a position minutely differing from it’s zero ‘g’ position. Simultaneously, the current to the torquer motor is fed through a stable resistor to provide an output voltage proportional to the applied acceleration.
Key features AAA215 | AAA220
- High resolution down to 0.05 mg
- Closed loop force balance system
- Flight qualified versions available
- Self-Test facility
- DC Input – DC Output
- Manufactured to AS9100C and ISO 9001:2008 standards
- 1g bias option to compensate for earth’s gravity (AAA220 only)
Applications AAA210 | AAA220
- Flight test monitoring
- Accident data collection
- Structural health monitoring
- Flight simulators
- Braking control on mass transit systems
- Road bed analysis
- Data acquisition systems
- Low frequency analysis
Avez-vous besoin de ce capteur pour votre prochain projet?
Demandez un devis sans engagement ou envoyez-nous vos coordonnées pour une consultation gratuite et sans engagement. Nos ingénieurs commerciaux vous contacteront dans un délai maximum de 1 à 2 jours ouvrables.
Téléchargements de produits
Parlez à nos experts
Vous ne trouvez pas exactement ce que vous cherchez ? Nous proposons des capteurs et des systèmes de mesure standard, mais nous pouvons également vous aider à concevoir un capteur sur mesure ou une solution de mesure complète. N'hésitez pas à nous contacter pour obtenir des conseils ou un devis.
Parler à un expertSpécifications techniques
Spécifications | Valeur |
---|---|
Altitude | 30,000 m (98,400 ft) |
Constant acceleration | 100g in all 3 axes without damage |
Current consumption | <± 15 mA |
Damping ratio | 0.6 ± 0.1 |
Environmental sealing | IP65 |
Hysteresis | 0.02 %FRO (max) |
Measurement range | ±1 g / ±2 g / ±5 g / ±10 g / ±20 g |
Natural frequency | 90 Hz(min) / 100 Hz(min) / 115 Hz(min) / 130 Hz(min) / 150 Hz(min) |
Non-linearity | 0.05 % (up to 10 g), 0.1 % (20 g) |
Operating temperature | -55 °C to +95 °C (-67 °F to 203 °F) |
Output [supply voltage] | ±5 VDC [±15 VDC] |
Resolution | 0.0005 % FRO (max) |
Shock | 100g, 11ms ½ sine |
Survival temperature range | - 65 °C to 105 °C (-85 °F to 221 °F) |
Weight | A215: 57 g (2 oz) ; A220: 115 g (4.1 oz) |
Produits apparentés
Besoin d'autre chose?
AAA260 Servo Accelerometer
- High resolution down to 0.05 mg
- Closed loop force balance system
- Flight qualified versions available
AAA545 Servo Accelerometer
-
Essentially zero temperature coefficent of damping ratio
-
Integral temperature compensation
-
DC input - DC output