JDI-100/200 Single or Dual-Axis MEMS Inclinometer
A digitally temperature compensated inclinometer available in single and dual axis configurations
Caractéristiques principales
- Ranges: ±1°, ±3°, ±14.5°, ±30°, and ±60°
- Digital Interface Options: ASCII (RS-485/RS-232) and Modbus (RS-485)
- Robust & Rugged Enclosure
- Single or Dual Axis Options
- Low-cost MEMS Technology
- RoHS and REACH Compliant
- Single DC Power Input - Galvanically Isolated
- Integrated Temperature Sensor
- IP67 Seal (when mated to IP67 connector)
About the JDI-100/200 MEMS Inclinometer
The JDI-100/200 Inclinometer is a digitally temperature compensated inclinometer available in 1-axis and
2-axis configurations. The robust and rugged design is great for industrial use, yet includes low-cost MEMS technology.
These units are available with DB9, Pigtail, Deutsch, Double Deutsch, 6-Pin Circular (C06), or M12 connectors for maximum versatility.
Applications JDI-100/200 Series
- Industrial Automation & Control
- Construction & Agricultural Equipment
- Solar Tracking
- Mobile Cranes
- Platform Leveling/Positioning
- Mobile Radar Equipment
- Bridge Monitoring
Avez-vous besoin de ce capteur pour votre prochain projet?
Demandez un devis sans engagement ou envoyez-nous vos coordonnées pour une consultation gratuite et sans engagement. Nos ingénieurs commerciaux vous contacteront dans un délai maximum de 1 à 2 jours ouvrables.
Téléchargements de produits
Parlez à nos experts
Vous ne trouvez pas exactement ce que vous cherchez ? Nous proposons des capteurs et des systèmes de mesure standard, mais nous pouvons également vous aider à concevoir un capteur sur mesure ou une solution de mesure complète. N'hésitez pas à nous contacter pour obtenir des conseils ou un devis.
Parler à un expertSpécifications techniques
| Spécifications | Valeur |
|---|---|
| Absolute accuracy2, 4 (°, max) | 0.015 |
| Accuracy - temperature sensor (°c, max) | ±2 |
| Bandwidth (hz nom) (-3 db) | (Sample Rate) / 4 |
| Baud3 (bps) | 2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400, 460800, 500000 (max) |
| Bias over temperature (ppm/°c, typ) | 80 |
| Communication settings3 | 8 bits, 1 stop bit, even | odd |
| Data sample rate3 (hz) | 3.9, 7.8, 15.6, 31.2, 62.5, 125 |
| Digital resolution (°, max) | 0.0001 |
| Galvanic isolation - power inputs (rms) | 2000 |
| Galvanic isolation - rs-485/rs-232 (rms) | 5000 |
| Input voltage range (vdc) | 5 min, 9 to 36 typ, 38 max, reverse wiring protected |
| Measurement range1 (°) | ±1, ±3, ±14.5, ±30, ±60 |
| Non-linearity (% fs), (-20°c to 50°c) | 0.60, 0.20, 0.05, 0.03, 0.02 |
| Number of axes | 1 or 2 |
| Operating temperature range | -40° to +85°C |
| Power - rs485 termination disabled (mw, max) | 600.0 |
| Power - rs485 termination enabled (mw, max) | 800.0 |
| Relative accuracy2 (°, typ) | 0.004 |
| Repeatability (°) | 0.01 |
| Seal | IP67 (when mated to IP67 connector) |
| Storage temperature range | -55° to +105°C |
| Transverse axis misalignment (°, max) | 0.25 |
| Vibration | STORAGE TEMPERATURE RANGE -55° to +105°C WEIGHT OZ (G |
| Warm up time (seconds typ) | 0.5 |
| Weight oz (g) | up to 10.4 (294.8) |
Produits apparentés
Besoin d'autre chose?
JMI-100/200 Single or Dual-Axis Analog MEMS Inclinometer
- Measuring ranges: ±14.5°, ±30° and ±90°
- RoHS Compliant
- Robust and Rugged Enclosure
DML Digital MEMS Inclinometer
- Measuring range: from ±10° to ±90°
- Low-cost, Resolution: 0.05°
- RoHS certified version upon request
AMH Single or Dual-Axis Analog MEMS Inclinometer
- Measuring ranges: ±10°, ±30° or ±60°
- Analog 0-5V & 4-20mA Output, IP67
- RoHS certified version upon request