1. Althensensors
  2. Capteurs
  3. Capteurs de basculement & d’inclinaison
  4. Systèmes de mesure et de commutation de l'inclinaison
  5. NM1-IP-2L Tilt Measuring System

NM1-IP-2L Tilt Measuring System

Single axis tilt measuring system in aluminium enclosure (IP68)


Caractéristiques principales

  • Measuring range ±3° up to ±60° or 0 - 90°
  • Accuracy ±0,1° (up to ±10°), ±0,2° (up to ±30°), ±0,25° (up to ±60°)
  • Analogue output 4 - 20 mA (2-wire-technology)
  • Supply voltage 18 - 28 VDC

About the NM1-IP-2L Tilt Measuring System

The single axis industrial tilt measuring system NM1-IP-2L is the combination of a non-contact inclination
sensor and sensor adapted electronics. The measuring system is designed for precise tilt measurement in one
axis and intended for side assembly. Available tilt measuring ranges are ±3° to ±60° or 0 - 10° to 0 - 90°.
The analogue output signal of 4 - 20mA in 2-wire-technology is a standard signal and therefore a further
analysis is easily feasible.


The tilt measuring system is built into a robust EMC-safe die-cast aluminium enclosure (IP68), which is well
suited for applications in rough and industrial environments. Furthermore the built-in electronics are protected
against humidity and vibrations.

 

Avez-vous besoin de ce capteur pour votre prochain projet?

Demandez un devis sans engagement ou envoyez-nous vos coordonnées pour une consultation gratuite et sans engagement. Nos ingénieurs commerciaux vous contacteront dans un délai maximum de 1 à 2 jours ouvrables.

Parler à un expert

Parlez à nos experts

Vous ne trouvez pas exactement ce que vous cherchez ? Nous proposons des capteurs et des systèmes de mesure standard, mais nous pouvons également vous aider à concevoir un capteur sur mesure ou une solution de mesure complète. N'hésitez pas à nous contacter pour obtenir des conseils ou un devis.

Parler à un expert

Spécifications techniques

Spécifications Valeur
Accuracy at 23°c Up to ±10°: ±0,1°, Up to ±30°: ±0,2°, Up to ±60°: ±0,25°
Analogue output / burden 4 - 20 mA (2-wire), max burden depending on supply voltage
Dimensions (w x h x d) 98 x 63 x 38 mm (Dimensions without EMC-cable gland)
Electrical connection 3 m cable 2 x 0,25 mm² (AWG20) Optional: cable length according to customer requirements or connector M12
Enclosure EMC-safe aluminium die-cast enclosure
Frequency range (-3db) 0,5Hz
Number of measuring axis 1
Power consumption Max. 1 W
Preferred measuring range ±3°, ±5°, ±10°, ±15°, ± 20°, ±30°, ±45°, ±60° 0 to 10°, 0 to 30°, 0 to 45°, 0 to 60°, 0 to 90° other measuring ranges on request
Protection class IP 68
Supply voltage: 18 to 28 VDC, electronic is protected against voltage reversal
Temperature, operating -20 to +60 °C
Temperature, storage -35 to +75 °C
Weight Approx. 550g (Version with 3 m cable)

Produits apparentés

Besoin d'autre chose?

NM1-IP-2L Tilt Measuring System

  • Measuring range: ±3° up to ±60° or 0 to 90°
  • IP68 aluminium enclosure
  • Supply voltage 18 - 28 VDC
Datasheet Voir le produit

NM1-IP-4L Tilt Measuring System

  • Measuring range: ±3° up to ±60° or 0 to 90°
  • IP66 environmental sealing
  • Accuracy ±0,1° (up to ± 15°)
Datasheet Voir le produit