NM1-ISU-IP Tilt Measuring System
Single axis tilt measuring system with digital and analog connection
Caractéristiques principales
- Single Axis Industrial Tilt Measuring System with RS232-Data Interface
- Supply voltage 22 … 26 VDC
- Adjustable measuring range up to 360°
- Accuracy ±0.2°
- RS232 Data Interface, optionally analogue output 4 … 20 mA)
About the NM1-ISU-IP Tilt Measuring System
The single axis industrial tilt measuring system NM1-ISU is designed for precise tilt measurement in X axis and intended for the side wall mounting. The inclination ranges are selectable via an internal DIP switch. The measuring data are output via a RS232 data interface. Optional an additional scalable analogue output 4… 20 mA is available.
The tilt measuring system is built-in into a robust EMC-safe aluminium die-cast enclosure (IP66), which is suited for applications in rough and industrial environments.
Avez-vous besoin de ce capteur pour votre prochain projet?
Demandez un devis sans engagement ou envoyez-nous vos coordonnées pour une consultation gratuite et sans engagement. Nos ingénieurs commerciaux vous contacteront dans un délai maximum de 1 à 2 jours ouvrables.
Téléchargements de produits
Parlez à nos experts
Vous ne trouvez pas exactement ce que vous cherchez ? Nous proposons des capteurs et des systèmes de mesure standard, mais nous pouvons également vous aider à concevoir un capteur sur mesure ou une solution de mesure complète. N'hésitez pas à nous contacter pour obtenir des conseils ou un devis.
Parler à un expertSpécifications techniques
| Spécifications | Valeur |
|---|---|
| Accuracy | ±0.2° |
| Adjustable measuring range | Measuring range about internal DIP-Switch ±10°, ±20°, ±30°, ±45°, ±60°, ±90°, ±120°, ±180° Inclination |
| Data interface/analogue output/ power rating | RS232 Data Interface, 4 - 20 mA (Option …-420..-), max. 500 Ohm |
| Dimensions (w x h x d) | 150 x 65 x 36 mm (without EMC-cable gland) |
| Electrical connection: | Standard: 3 m connecting cable (optionally are cable versions up to 10 m available) Type of cable: Unitronic FD CP plus 3 x 2 x 0.25 mm² |
| Enclosure | EMC-safe aluminium die-cast enclosure |
| Hysteresis | ±0.1° |
| Measuring frequency | 0.4 Hz |
| Power consumption: | ca. 3 W |
| Repeatability | ±0.1° |
| Supply voltage: | 22 - 26 VDC, electronics protected against voltage reversal |
| Temperature error | ±0.015°/°C |
| Temperature, operating | -20 to +60 °C |
| Temperature, storage | -20 to +60 °C |
| Weight | Approx. 630 g with 3 m connecting cable, electronics not moulded in casting compound Approx. 1150 g with 10 m connecting cable, electronics not moulded in casting compound |
Produits apparentés
Besoin d'autre chose?
NM2-IP2-2L Tilt Measuring System
- Measuring range ±3° up to ±45° per axis
- In a compact EMC-safe aluminium enclosure
- Accuracy ±0.1° to ±0.25°