NM2-IP2-2L Tilt Measuring System
Dual axis tilt measuring system in a compact aluminium enclosure
Caractéristiques principales
- Measuring range ±3° up to ±45° per axis
- Accuracy ±0.1° (up to ±10°), ±0.2° (up to ±30°),±0.25° (up to ±45°)
- Analogue output 4 - 20 mA (2-wire-technology)
- Supply voltage 18 - 28 VDC
About the NM2-IP-2L Tilt Measuring System
The dual axis industrial tilt measuring system NM2-IP-2L is the combination of two non-contact inclination sensors and sensor adapted electronics. The measuring system is designed for precise tilt measurement in X- and Y-axis and intended for ground assembly. Available tilt measuring ranges are ±3° to ±45°. The two analogue output signals of 4 ... 20mA in 2-wire-technology are standard signals and therefore a further analysis is easily feasible.
The tilt measuring system is built into a robust EMC-safe die-cast aluminium enclosure (IP66), which is well suited for applications in rough and industrial environments. Furthermore, the built-in electronics are protected against humidity and vibrations.
Avez-vous besoin de ce capteur pour votre prochain projet?
Demandez un devis sans engagement ou envoyez-nous vos coordonnées pour une consultation gratuite et sans engagement. Nos ingénieurs commerciaux vous contacteront dans un délai maximum de 1 à 2 jours ouvrables.
Téléchargements de produits
Parlez à nos experts
Vous ne trouvez pas exactement ce que vous cherchez ? Nous proposons des capteurs et des systèmes de mesure standard, mais nous pouvons également vous aider à concevoir un capteur sur mesure ou une solution de mesure complète. N'hésitez pas à nous contacter pour obtenir des conseils ou un devis.
Parler à un expertSpécifications techniques
| Spécifications | Valeur |
|---|---|
| Accuracy at 23°c | Up to ±10°: ±0.1° ; Up to ±30°: ±0.2° ; Up to ±45°: ±0.25° |
| Analogue output / burden | 4 - 20 mA (2-wire), max burden depending on supply voltage |
| Cross-sensitivity | < 1.5% at 30° |
| Dimensions (w x h x d) | ca. 160 x 65 x 86 mm (without EMC cable gland) |
| Electrical connection | M16 x 1.5 EMC cable glands on internal spring-cage terminal blocks |
| Enclosure | EMC-safe aluminium die-cast enclosure |
| Frequency range (-3db) | 0.5 Hz |
| Number of measuring axis | 2 |
| Power consumption | ca. 2 W |
| Preferred measuring range | ±3°, ±5°, ±10°, ±15°, ± 20°, ±30°, ±45° (other measuring ranges for both axis as well as different measuring ranges for each axis (e.g. X: ±30° Y: ±3°) on request possible) |
| Protection class | IP66 |
| Supply voltage | 18 - 28 VDC |
| Temperature, operating | -20 to +60 °C |
| Temperature, storage | -20 to +60 °C |
| Weight | ca. 1000 g |
Produits apparentés
Besoin d'autre chose?
NM2-IP-4L Tilt Measuring System
- Measuring range ±3° up to ±60° or 0 - 90°
- Dual axis tilt measuring system
- Robust EMC-safe aluminium enclosure IP66
NSS1-IP Tilt Measuring System
- Measuring range ±3° up to ±60° or 0 to 90°
- Switching accuracy max. 0,5%
- With 2 switching contacts
NSS2-M2-IP Tilt Measuring System
- Measuring range ±3° up to ±10°
- With 2 switching contacts per axis
- Robust EMC-safe aluminium enclosure IP66