Caractéristiques principales

Measuring range ±3° up to ±60° or 0 … 90°
Switching accuracy max. 0,5% of measuring range
Supply voltage 18 … 30 VDC
Output: 2 potential-free switching contacts (max. 30VDC/0,5A)

About the NSZ1-IP Tilt Measuring System

The single axis industrial tilt switching system NSZ1-IP is the combination of a non-contact inclination sensor AccuStar®-EA and sensor adapted electronics. The measuring system is designed for precise tilt monitoring in one axis and intended for side assembly. Available tilt measuring & monitoring ranges are ±3° to ±60° or 0 … 10° to 0 … 90°. By using the build-in potentiometers, which can be seen after removing the case cover, the switching setpoints can be adjusted as needed over the whole measuring range. The relays have potentialfree switching contacts (max. 30 VDC / 0.5 A). The switching delay of the relay is 1 sec at the standard version. Other switching delays possible on request.

The tilt measuring system is built into a robust EMC-safe die-cast aluminium enclosure (IP66), which is well suited for applications in rough and industrial environments

Avez-vous besoin de ce capteur pour votre prochain projet?

Demandez un devis sans engagement ou envoyez-nous vos coordonnées pour une consultation gratuite et sans engagement. Nos ingénieurs commerciaux vous contacteront dans un délai maximum de 1 à 2 jours ouvrables.

Parler à un expert

Téléchargements de produits

Nsz1 ip tilt measuring system en

Parlez à nos experts

Vous ne trouvez pas exactement ce que vous cherchez ? Nous proposons des capteurs et des systèmes de mesure standard, mais nous pouvons également vous aider à concevoir un capteur sur mesure ou une solution de mesure complète. N'hésitez pas à nous contacter pour obtenir des conseils ou un devis.

Parler à un expert

Spécifications techniques

Spécifications	Valeur
Cross-sensitivity	< 1% up to ±60°
Dimensions (w x h x d)	175 x 80 x 57 mm (without EMC cable glands)
Electrical connection	M16 x 1,5 EMC cable glands on internal spring-cage terminal blocks
Enclosure	EMC-safe aluminium die-cast enclosure
Frequency range (-3db)	0,5 Hz
Max. power rating of relay	30 VDC / 0,5 A
Number of measuring axis	1
Number of relay switching contacts / switching delay	2 / 1 sec
Power consumption	ca. 4 W
Preferred measuring range	±3°, ±5°, ±10°, ±15, ±20, ±30, ±45°, ±60° 0 - 10°, 0 - 30°, 0 - 45°, 0 - 60°, 0 - 90° other measuring ranges on request
Protection class	IP66
Supply voltage	18 - 30 VDC, electronics protected against voltage reversal
Switching accuracy at 23 °c:	max. 0,5% of measuring range
Temperature, operating	-20 to +60 °C
Temperature, storage	-20 to +60 °C
Test signal	2 - 10 V, not short-circuit proof
Weight	1.000 g

NSZ1-IP Tilt Measuring System