SGR530/540 Torque Sensor
TorqSense Digital rotary strain gauge series (SGR) Transducers with non contact technology
Caractéristiques principales
- Transducers from 175mNm to 13000Nm.
- Large fully functional overrange capability of 250% (SGR 540)
- Separate digital electronics
- Minimal side and end load errors
- Low linearity deviation of ± 0.05 % FSD
- Low hysteresis error of ± 0.05 % FSD
- Zero variation in torque signal with rotation (cyclic variation)
About the SGR530/540 Torque Sensor
Torqsense Digital rotary strain gauge SGR530/540 series Transducers with separate electronics use non
contact technology eliminating the need for noisy slip rings. They are suitable for torque measuring, testing,
feedback control of drive mechanisms and process control applications.
The SGR series transducers use modern strain gauge signal conditioning techniques to provide a high bandwidth low cost torque measuring solution with
high overrange and overload capabilities.
Key Features
- Transducers from 175mNm to 13000Nm.
- Large fully functional overrange capability of 250% (SGR 540)
- Separate digital electronics
- Minimal side and end load errors
- Low linearity deviation of ± 0.05 % FSD
- Low hysteresis error of ± 0.05 % FSD
- Zero variation in torque signal with rotation (cyclic variation)
- Non contact signal transmission, no slip rings to wear out
- High digital sample rate of 4000 samples per second
- Adjustable torque data smoothness, low pass filter (SGR540)
- Speed measurement / Power computation
- Wide power supply range 12-32 VDC
- Compatible with ethernet gateway module
TorqSense SGR530 Series transducers offer:
- Fixed voltage or current analog outputs (one for torque and the other for speed or power) for interfacing with analog instrumentation
- BIT Self-diagnostics for letting the manufacturer know that the transducer‘s torque, speed ratings and calibration due date have not been exceeded.
- Simple ‚Sensor status‘ output pin
- Sensors to monitor shaft temperature for better compensation and accuracy
Whereas, TorqSense SGR540 Series transducers offer:
- Digital outputs, such as RS232, CANbus and USB, for interfacing with modern instrumentation and laptops
- Digital input for configuring transducer via PC
- 2 x user selectable voltage or current analog outputs (one for torque and the other for speed, power or peak torque) for interfacing with analog instrumentation
- Transducer configuration software to allow user to change transducer variables
- BIT Self-diagnostics for letting users know data is trustworthy, that the transducer‘s torque, speed ratings and calibration due date have not been exceeded
- Simple ‚Sensor status‘ output pin
- Sensors to monitor shaft temperature for better compensation and accuracy
- Ability to connect up to 10 transducers using USB
- Optional external ethernet gateway module
Avez-vous besoin de ce capteur pour votre prochain projet?
Demandez un devis sans engagement ou envoyez-nous vos coordonnées pour une consultation gratuite et sans engagement. Nos ingénieurs commerciaux vous contacteront dans un délai maximum de 1 à 2 jours ouvrables.
Téléchargements de produits
Parlez à nos experts
Vous ne trouvez pas exactement ce que vous cherchez ? Nous proposons des capteurs et des systèmes de mesure standard, mais nous pouvons également vous aider à concevoir un capteur sur mesure ou une solution de mesure complète. N'hésitez pas à nous contacter pour obtenir des conseils ou un devis.
Parler à un expertSpécifications techniques
| Spécifications | Valeur |
|---|---|
| Accuracy | ±1rpm up to 30,000 rpm |
| Combined non-linearity and hysteresis | ±0.1 |
| Output voltages | ±1 / ±5 / ±10 / Unipolar (SGR530 Series default setting is ±5Vdc) |
| Repeatability | 0.05 %FS |
| Resolution | 0.01 %FS |
| Rotational speed (max) | 6,000 - 30,000 rpm |
| Temperature accuracy | ±1 °C |
| Torque range | 0 - 13000 Nm |