1. Althensensors
  2. Capteurs
  3. Capteurs de force
  4. Capteurs de force cylindriques
  5. ALF330 Load Cell

ALF330 Load Cell

Fatigue rated, high stiffness, low range load cell


Caractéristiques principales

  • Measurement ranges 0,5N, 1N, 2,5N, 5N, 10N, 20N
  • Tension / compression
  • Non-linearity ±0.2 % RL
  • Supply voltage 10 VDC max
  • Output signal 0.6 mV/V or rationalised 0.5 mV/V ±0.5 %

About the ALF330 Load Cell

The ALF330 low range load cell has been developed to meet a growing need for high resolution, low range force
measurement with minimal translational deflection. The high stiffness of these load cells, combined with their
robust construction, lends themselves particularly well to dynamic and/or fatigue applications.

The minimum fatigue life of 108 fully reversed RL cycles can be greatly extended if the cycles occur below full rated
load. Both the ALF328 and ALF329 load cell product types offer excellent performance but rely on a comparatively low stiffness strain mechanism. The ALF329 in particular requires a reduced output sensitivity in order to maintain
some level of robustness. The ALF330 on the other hand offers some advantages over both and also benefits from a purely mechanical resistance to sideloads and vectors.

Sideloads up to 25% RL can be withstood for as little as 2% RL error. Similarly, misalignment of up to 3° swept 360° around the measurement axis typically yields no more than 1% RL error. The strain section within the housing is a separate monocoque structure, allowing repairs to be made quickly and cheaply in comparison to other low range load cells. Other housing designs and fixing arrangements are therefore possible.

Avez-vous besoin de ce capteur pour votre prochain projet?

Demandez un devis sans engagement ou envoyez-nous vos coordonnées pour une consultation gratuite et sans engagement. Nos ingénieurs commerciaux vous contacteront dans un délai maximum de 1 à 2 jours ouvrables.

Parler à un expert

Téléchargements de produits

Parlez à nos experts

Vous ne trouvez pas exactement ce que vous cherchez ? Nous proposons des capteurs et des systèmes de mesure standard, mais nous pouvons également vous aider à concevoir un capteur sur mesure ou une solution de mesure complète. N'hésitez pas à nous contacter pour obtenir des conseils ou un devis.

Parler à un expert

Spécifications techniques

Spécifications Valeur
Calibration compressed, tension, bi-directional
Creep - 20 minutes ±0.02% AL
Hysteresis ±0.1% RL
Non-linearity, terminal ±0.2% RL
Rated load, stat 0,5N / 1N / 2,5N / 5N / 10N / 20N
Rated output - nominal 0.6 mV/V
Repeatability ±0.02% RL