ALF245 Miniature Force Sensor
High accuracy and compact axial geometry
Caractéristiques principales
- Axial compensated loadcell
- Measurement range: 100N, 200N, 400N, 800N
- Tension, compression and bi-directional
- Non-lin./hysteresis: 0.1/0.1% RL
- Dimensions (mm): Ø30 x 32
- High accuracy
- Misalignment error compensation
- Low deflection at full load
About the ALF245 Miniature Force Sensor
The ALF245 is ideally suited to low range engineering force measurements and process weighing. When precision and easy installation are required various configurations allow the loadcell to be used in both tensile and compressive applications.
We are happy to design variants of this loadcell to meet your specific requirements. Versions can be manufactured for higher temperature operation. Please consult our engineering department.
Geometry: Flexure strain assembly in cylindrical housing, open or weather sealed with end internal fixing. For universal use in tension and compression, with compensation for off axis load inputs.
Additional Features ALF245 Miniature Force Sensor
- Compact axial geometry
- Standard 2 year warranty
- Traceable calibration with certificate
- Included in the standard price
Standard ranges up to 200N have an aluminium body and stainless steel case. Ranges above 200N have stainless steel bodies and cases.
Notes
1. AL = Applied load. 3. Temperature coefficients apply over the compensated range.
2. RL = Rated load.
Connections
The loadcell is fitted with 2 metres of PVC insulated 4 core screened cable type 7-2-4C.
Excitation + = Red Signal + = Yellow Screen = Orange
Excitation - = Blue Signal - = Green
Reverse the signal connections to obtain a positive signal in tension mode. The screen is not connected to the loadcell body.
Avez-vous besoin de ce capteur pour votre prochain projet?
Demandez un devis sans engagement ou envoyez-nous vos coordonnées pour une consultation gratuite et sans engagement. Nos ingénieurs commerciaux vous contacteront dans un délai maximum de 1 à 2 jours ouvrables.
Téléchargements de produits
Parlez à nos experts
Vous ne trouvez pas exactement ce que vous cherchez ? Nous proposons des capteurs et des systèmes de mesure standard, mais nous pouvons également vous aider à concevoir un capteur sur mesure ou une solution de mesure complète. N'hésitez pas à nous contacter pour obtenir des conseils ou un devis.
Parler à un expertSpécifications techniques
| Spécifications | Valeur |
|---|---|
| Bridge resistance | 350 Ω |
| Creep - 20 minutes | ±0.1% AL |
| Excitation voltage - maximum | 10V |
| Excitation voltage - recommended | 10V |
| Hysteresis | ±0.1% RL |
| Insulation resistance - minimum at 50vdc | 500 MΩ |
| Load direction | Tension, compression, bi-directional |
| Measurement range | 100N, 200N, 400N, 800N |
| Non-linearity - terminal | ±0.1% RL |
| Overload - safe | 20% RL |
| Overload - ultimate | 100% RL |
| Rated output - nominal | 2.2mV/V |
| Rated output - rationalised (applies to single direction calibrations) | 2.0mV/V |
| Rationalisation tolerance | ±0.1% RL |
| Repeatability | ±0.02% RL |
| Temperature effect on rated output per °c | ±0.005% AL |
| Temperature effect on zero load output per °c | ±0.005% RL |
| Temperature range - compensated | -10 to +50°C |
| Temperature range - safe | -10 to +80°C |
| Weight - nominal (excluding cable) | 40 to 50g |
| Zero load output | ±4% RL |
Produits apparentés
Besoin d'autre chose?
ALF250 Miniature Force Sensor
- Measuring ranges: up to 800 N
- IP65 protection rating
- Non-lin./hysteresis: 0.5/0.5% RL
ALF251 Miniature Force Sensor
- Measurement range: up to 3.2 kN
- Ideal for applications in confined spaces
- IP65 protection rating
ALF255 Miniature Force Sensor
- Measurement ranges: up to 6.4 kN
- Versions operating up to +250°C possible
- ø30mm x 25mm body