ALF259 Miniature Diaphragm Force Sensor

Miniature diaphragm load cell with bi-directional versions, for force measurements in confined spaces

Caractéristiques principales

Miniature diaphragm loadcell
Measurement range: 250N, 500N, 1kN
Tension, compression and bi-directional
Non-lin./hysteresis: 0.5/0.5% RL
Dimensions (mm): Ø12.7 x 9
Easy installation
Hardened stainless steel body

About the ALF259 Miniature Diaphragm Force Sensor

The force sensor ALF259 is ideally suited to force measurements in confined spaces in both tension and compression for control of critical parameters in all kinds of industrial processes. Their versatility is such that they are also applied in a great number of important fields of scientific and engineering test work, mobile as well as workshop, static and dynamic.

Geometry: Very small loadbutton cell for force measurement in confined spaces. Used in compression and/or tension on a wide range of OEM or end-user applications.

With bi-directional versions there is a small difference between the output signal for compression and tension. All standard bi-directional loadcells are calibrated in both modes and the output for each direction is stated on the test / calibration certificate.

Application area

Industrial process
Scientific and engineering test work

Other Features ALF259

Tension / compression / bi-directional calibration
Standard 2 year warranty

All standard ranges are manufactured in stainless steel.
When this loadcell is rationalised the resistors are housed in a capsule located in the loadcell cable 100mm from the free end. Capsule dimensions are Ø10mm by 57mm.

Notes
1. AL = Applied load. 3. Temperature coefficients apply over the compensated range.
2. RL = Rated load. 4. The load must be applied directly through the central loading axis.

Connections

The loadcell is fitted with 2 metres of PVC insulated 4 core screened cable type 7-1-4C.
Excitation + = Red Signal + = Yellow Screen = Orange
Excitation - = Blue Signal - = Green
Reverse the signal connections to obtain a positive signal in tension mode. The screen is not connected to the loadcell body.

We are happy to design variants of this loadcell to meet your specific requirements. Please consult our engineering department.

Avez-vous besoin de ce capteur pour votre prochain projet?

Demandez un devis sans engagement ou envoyez-nous vos coordonnées pour une consultation gratuite et sans engagement. Nos ingénieurs commerciaux vous contacteront dans un délai maximum de 1 à 2 jours ouvrables.

Parler à un expert

Téléchargements de produits

Alf259 miniature diaphragm force sensor en

Parlez à nos experts

Vous ne trouvez pas exactement ce que vous cherchez ? Nous proposons des capteurs et des systèmes de mesure standard, mais nous pouvons également vous aider à concevoir un capteur sur mesure ou une solution de mesure complète. N'hésitez pas à nous contacter pour obtenir des conseils ou un devis.

Parler à un expert

Spécifications techniques

Spécifications	Valeur
Bridge resistance	350 Ω
Creep - 20 minutes	±0.2% AL
Excitation voltage - maximum	10V
Excitation voltage - recommended	5V
Hysteresis	±0.5% RL
Insulation resistance - minimum at 50vdc	500 MΩ
Load direction	Tension, compression, bi-directional
Measurement range	250N, 500N, 1kN
Non-linearity - terminal	±0.5% RL
Overload - safe	50% RL
Overload - ultimate	100% RL
Rated output - nominal	1.6mV/V
Rated output - rationalised	1.0mV/V
Rationalisation tolerance (applies to single direction calibrations)	±0.5% RL
Repeatability	±0.1% RL
Sealing	IP65
Temperature effect on rated output per °c	±0.005% AL
Temperature effect on zero load output per °c	±0.03% RL
Temperature range - compensated	-10 to +50°C
Temperature range - safe	-10 to +80°C
Weight - nominal (excluding cable)	6 to 7.5g
Zero load output	±4% RL