ALF314 Multi-axis Force Sensor
Measures forces in two axes at 90°
Caractéristiques principales
- Two axis loadcell
- Full load range: 2 - 10kN
- Rated output nominal: 1.2mV/V
- Non-lin./hysteresis: 0.1/0.1% RL
- Dimensions (mm): 110 x 63 x 20
About the ALF314 Multi-axis Force Sensor
The ALF314 measures forces in two axes at 90°. Apart from error evaluations, each output is pure and requires no mathematical manipulation.
The loadcell is ideally suited to many industrial and scientific applications, including automotive research.
The integral spherical bearing removes the possibility of applying moments to the loadcell. If rigid fixings are required and moments are present the performance specification may be affected, our engineering department would be happy to evaluate performance changes.
The loadcell can be manufactured with force ranges to suit the application. Please consult our engineering department about the viability of the required ranges. The example shown in the picture and drawing is a ±200kg model; there will be small differences in the dimensions of the fixings for other ranges.
We are happy to design variants of this loadcell to meet your specific requirements. Versions can be manufactured for higher temperature operation. Please consult our engineering department.
Notes
1. AL = Applied load. 3. Temperature coefficients apply over the compensated range.
2. RL = Rated load. 4. Values apply to all axes unless otherwise specified.
Connections
The ALF314 is fitted with 2 metres of PVC insulated 9 core screened cable type 7-1-9C.
Avez-vous besoin de ce capteur pour votre prochain projet?
Demandez un devis sans engagement ou envoyez-nous vos coordonnées pour une consultation gratuite et sans engagement. Nos ingénieurs commerciaux vous contacteront dans un délai maximum de 1 à 2 jours ouvrables.
Téléchargements de produits
Parlez à nos experts
Vous ne trouvez pas exactement ce que vous cherchez ? Nous proposons des capteurs et des systèmes de mesure standard, mais nous pouvons également vous aider à concevoir un capteur sur mesure ou une solution de mesure complète. N'hésitez pas à nous contacter pour obtenir des conseils ou un devis.
Parler à un expertSpécifications techniques
| Spécifications | Valeur |
|---|---|
| Bridge resistance | 350 Ω |
| Creep - 20 minutes | ±0.1% AL |
| Excitation voltage - maximum | 10V |
| Excitation voltage - recommended | 10V |
| Hysteresis | ±0.1% RL |
| Insulation resistance - minimum at 50vdc | 500 MΩ |
| Load direction | Bi-directional |
| Maximum cross talk | 1% RL |
| Measurement range | 2kN - 10kN |
| Non-linearity - terminal | ±0.1% RL |
| Overload - safe | 50% RL |
| Overload - ultimate | 100% RL |
| Rated output - nominal | 1.2mV/V |
| Repeatability | ±0.02% RL |
| Sealing | IP65 |
| Temperature effect on rated output per °c | ±0.005% AL |
| Temperature effect on zero load output per °c | ±0.01% RL |
| Temperature range - compensated | -10 to +50°C |
| Temperature range - safe | -10 to +80°C |
| Weight - nominal (excluding cable) | 0.3 to 0.8kg |
| Zero load output | ±4% RL |
Produits apparentés
Besoin d'autre chose?
ALF232/3 Multi-axis Force Sensor
- Measuring range: 100 N to 5 kN
- Dual or triple axis force transducer
- Simple installation
ALF307 Multi-axis Force Sensor
- Measuring range: 10 or 20 kN
- Bi-directional three axis loadcell
- Manufacturing variations possible