ALF305 Seat Belt Tension Force Sensor
High performance loadcell for measuring seat belt tension forces
Caractéristiques principales
- Measurement range: 16 kN
- Tension
- Non-linearity 3.0 % RL
- Output signal 1.5 mV/V
- Supply voltage 10 VDC
About the ALF305 Seat Belt Tension Force Sensor
The ALF305 is a high performance load cell for measuring seat belt tension forces. Its geometry was created by computer program to generate an optimal design with minimal mass, material usage, stress and deflection. The outer bars can easily be removed allowing fitting to a seat belt while it is anchored at both ends.
The performance figures are typical values and are dependent on belt type. We can carry out a 5 point calibration using a 2 m sample of customer supplied belt to reduce application errors. The calibration data can be used to reduce non- linearity errors in test results.
Avez-vous besoin de ce capteur pour votre prochain projet?
Demandez un devis sans engagement ou envoyez-nous vos coordonnées pour une consultation gratuite et sans engagement. Nos ingénieurs commerciaux vous contacteront dans un délai maximum de 1 à 2 jours ouvrables.
Téléchargements de produits
Parlez à nos experts
Vous ne trouvez pas exactement ce que vous cherchez ? Nous proposons des capteurs et des systèmes de mesure standard, mais nous pouvons également vous aider à concevoir un capteur sur mesure ou une solution de mesure complète. N'hésitez pas à nous contacter pour obtenir des conseils ou un devis.
Parler à un expertSpécifications techniques
| Spécifications | Valeur |
|---|---|
| Bridge resistance | 350 Ω |
| Creep - 20 minutes | ±0.05% AL |
| Excitation voltage - maximum | 10V |
| Excitation voltage - recommended | 10V |
| Hysteresis | ±1% RL |
| Insulation resistance - minimum at 50vdc | 500 MΩ |
| Load direction | Tension |
| Measurement range | 16kN |
| Non-linearity - terminal | ±3% RL |
| Overload - safe | 30% RL |
| Overload - ultimate | 100% RL |
| Rated output - nominal | 1.5mV/V |
| Repeatability | ±0.2% RL |
| Structural stiffness (normal to belt axis) | 1.9 x 10^7 N/m |
| Temperature effect on rated output per °c | ±0.005% AL |
| Temperature effect on zero load output per °c | ±0.007% RL |
| Temperature range - compensated | -10 to +50°C |
| Temperature range - safe | -10 to +80°C |
| Weight - nominal (excluding cable) | 50g |
| Zero load output | ±4% RL |
Produits apparentés
Besoin d'autre chose?
ALF319 Hand Brake Force Sensor
- Measuring range: 0 to 1 kN
- Measurement of an ergonomic force
- Good extraneous load rejection
ALF321 Gear Shift Force Sensor
- Measuring range: 0 to 200 N
- Measures gear lever forces for gear selection
- Pure calibrated outputs for each axis
ALF322 Accelerator Pedal Force Sensor
- Measuring range: 0 to 250 N
- Off center loading compensation
- Lightweight aluminium alloy construction