ALF321 Gear Shift Force Sensor
Measures gear lever forces required to achieve gear selection
Caractéristiques principales
- Gear lever actuation forces measured in 3 axes
- User friendly pure calibrated outputs for each axis
- Designed for hand or robotic actuation
- In car ergonomic replication
- Easily customized
About the ALF321 Gear Shift Force Sensor
The ALF321 gear shift loadcell measures gear lever forces required to achieve gear selection. An ergonomically designed gear knob senses the force from a human hand or a mechanical actuator. The three axis force components are represented by three pure loadcell output signals. The gear shift loadcell is supplied calibrated and ready to use, no in-situ calibration or mathematical computation is required.
Easy fitment is achieved with mechanical axis referencing and simple attachment to a male thread or adapter.
The gear shift loadcell, like all our automotive products, can be produced for environmental test chamber temperature requirements of -40 to 80°C.
We are happy to design variants of this loadcell to meet your specific requirements.
The standard range is manufactured in aluminium.
Notes
1. AL = Applied load.
2. RL = Rated load.
3. Temperature coefficients apply over the compensated range.
4. Values apply to all axes unless otherwise specified.
Connections
The ALF321 is fitted with 2 metres of PVC insulated 12 core screened cable type 7-1-12C. The screen is not connected to the loadcell body.
Avez-vous besoin de ce capteur pour votre prochain projet?
Demandez un devis sans engagement ou envoyez-nous vos coordonnées pour une consultation gratuite et sans engagement. Nos ingénieurs commerciaux vous contacteront dans un délai maximum de 1 à 2 jours ouvrables.
Téléchargements de produits
Parlez à nos experts
Vous ne trouvez pas exactement ce que vous cherchez ? Nous proposons des capteurs et des systèmes de mesure standard, mais nous pouvons également vous aider à concevoir un capteur sur mesure ou une solution de mesure complète. N'hésitez pas à nous contacter pour obtenir des conseils ou un devis.
Parler à un expertSpécifications techniques
| Spécifications | Valeur |
|---|---|
| Bridge resistance x & y axis | 350 Ω |
| Creep - 20 minutes | ±0.1% AL |
| Excitation voltage - maximum | 10V |
| Excitation voltage - recommended | 10V |
| Hysteresis | ±0.5% RL |
| Insulation resistance - minimum at 50vdc | 500 MΩ |
| Load direction | Bi-directional |
| Maximum cross talk | 3% RL |
| Measurement range | 200N |
| Non-linearity - terminal | ±0.5% RL |
| Overload - safe | 50% RL |
| Overload - ultimate | 100% RL |
| Rated output - nominal | 1.0mV/V |
| Repeatability | ±0.02% RL |
| Structural stiffness - nominal - x & y axis | 2.0 x 10^6 N/m |
| Temperature effect on rated output per °c | ±0.005% AL |
| Temperature effect on zero load output per °c | ±0.01% RL |
| Temperature range - compensated | -10 to +50°C |
| Temperature range - safe | -10 to +80°C |
| Weight - nominal (excluding cable) | 150g |
| Z axis | 1.3 x 10^6 N/m |
| Z axis | 700 Ω |
| Zero load output | ±4% RL |
Produits apparentés
Besoin d'autre chose?
ALF319 Hand Brake Force Sensor
- Measuring range: 0 to 1 kN
- Measurement of an ergonomic force
- Good extraneous load rejection
ALF322 Accelerator Pedal Force Sensor
- Measuring range: 0 to 250 N
- Off center loading compensation
- Lightweight aluminium alloy construction
ALF323 Clutch Pedal Force Sensor
- Measuring rang: 0 to 1 kN
- Non-linearity: 0.05 % RL
- Removable loading plate