ALF250 Miniature Load Cell
Miniature diaphragm loadcell
Caractéristiques principales
- Miniature diaphragm loadcell
- Measurement range: 10kg, 20kg, 40kg, 80kg
- Tension, compression and bi-directional
- Non-lin./hysteresis: 0.5/0.5% RL
- Dimensions (mm): Ø15 x 8
- Easy installation
- Hardened stainless steel body
About the ALF250 Miniature Load Cell
The ALF250 is ideally suited to force measurements in confined spaces in both tension and compression for control of critical parameters in all kinds of industrial processes. Their versatility is such that they are also applied in a great number of important fields of scientific and engineering test work, mobile as well as workshop, static and dynamic.
We are happy to design variants of this loadcell to meet your specific requirements. Please consult our engineering department.
Geometry: Very small loadbutton cell for force measurement in confined spaces. Used in compression and/or tension on a wide range of OEM or end-user applications.
With bi-directional versions there is a small difference between the output signal for compression and tension. All standard bi-directional loadcells are calibrated in both modes and the output for each direction is stated on the test / calibration certificate.
Avez-vous besoin de ce capteur pour votre prochain projet?
Demandez un devis sans engagement ou envoyez-nous vos coordonnées pour une consultation gratuite et sans engagement. Nos ingénieurs commerciaux vous contacteront dans un délai maximum de 1 à 2 jours ouvrables.
Téléchargements de produits
Parlez à nos experts
Vous ne trouvez pas exactement ce que vous cherchez ? Nous proposons des capteurs et des systèmes de mesure standard, mais nous pouvons également vous aider à concevoir un capteur sur mesure ou une solution de mesure complète. N'hésitez pas à nous contacter pour obtenir des conseils ou un devis.
Parler à un expertSpécifications techniques
| Spécifications | Valeur |
|---|---|
| Bridge resistance | 350 Ω |
| Creep - 20 minutes | ±0.1, % AL |
| Excitation voltage - maximum | 10V |
| Excitation voltage - recommended | 5, V |
| Hysteresis | ±0.5, % RL |
| Insulation resistance - minimum at 50vdc | 500 MΩ |
| Load direction | Tension, compression, bi-directional |
| Measurement range | 10kg, 20kg, 40kg, 80kg |
| Non-linearity - terminal | ±0.5, % RL |
| Overload - safe | 50% RL |
| Overload - ultimate | 100 % RL |
| Rated output - nominal | 1.6, mV/V |
| Rated output - rationalised | 1.0, mV/V |
| Rationalisation tolerance | ±0.5, % RL |
| Repeatability | ±0.1, % RL |
| Sealing | IP65 |
| Temperature effect on rated output per ºc | ±0.005, % AL |
| Temperature effect on zero load output per ºc | ±0.03, % RL |
| Temperature range - compensated | -10 to +50, ºC |
| Temperature range - safe | -10 to +80, ºC |
| Weight - nominal (excluding cable) | 8 to 12g |
| Zero load output | ±4, % RL |
Produits apparentés
Besoin d'autre chose?
ALF251 Miniature Load Cell
- Measuring range: 0 - 10 to 0 - 320 kg
- Sealed to protection grade IP65
- -10 to +80ºC Operating temperature
ALF255 Miniature Load Cell
- Miniature diaphragm loadcell
- Measurement range: 10kg, 20kg, 40kg, 80kg, 160kg, 320kg, 640kg
- Tension, compression and bi-directional
ALF259 Miniature Diaphragm Load Cell
- Miniature diaphragm load cell
- Measuring range: 25kg, 50kg, 100kg
- Tension, compression and bidirectional