ALF303 Miniature Load Cell
Low cost axial force sensor
Caractéristiques principales
- Low cost axial force sensor
- Measurement range: 2000kg, 4000kg
- Tension, compression and bi-directional
- Non-lin./hysteresis: 2.0/2.0% RL
- Dimensions (mm): Ø38 x 25
- Low profile
- Sealed to IP65
About the ALF303 Miniature Load Cell
The ALF303 is aimed at the volume OEM user who requires a reliable high quality axial sensor at a low price for low accuracy compressive force measurement in equipment. It is manufactured from stainless steel and sealed to IP65 for long life in typical industrial operating conditions. The sensor is designed for simple mounting on a smooth flat surface.
Each sensor is labelled with its output for full range. A calibration certificate is not supplied as standard.
We are happy to design variants of this sensor to meet your specific requirements. Please consult our engineering department.
Other features ALF303
- Hardened stainless steel
- Standard 2 year warranty
All standard ranges are manufactured in stainless steel.
When the loadcell is rationalised the resistors are housed in a capsule located in the loadcell cable 100mm from the free end. Capsule dimensions are Ø10mm by 57mm.
Notes
1. AL = Applied load. 3. Temperature coefficients apply over the compensated range.
2. RL = Rated load. 4. The load must be applied directly through the central loading axis.
Connections
The loadcell is fitted with 2 metres of PVC insulated 4 core screened cable type 7-2-4C.
Excitation + = Red Signal + = Yellow Screen = Orange
Excitation - = Blue Signal - = Green
The screen is not connected to the loadcell body.
Avez-vous besoin de ce capteur pour votre prochain projet?
Demandez un devis sans engagement ou envoyez-nous vos coordonnées pour une consultation gratuite et sans engagement. Nos ingénieurs commerciaux vous contacteront dans un délai maximum de 1 à 2 jours ouvrables.
Téléchargements de produits
Parlez à nos experts
Vous ne trouvez pas exactement ce que vous cherchez ? Nous proposons des capteurs et des systèmes de mesure standard, mais nous pouvons également vous aider à concevoir un capteur sur mesure ou une solution de mesure complète. N'hésitez pas à nous contacter pour obtenir des conseils ou un devis.
Parler à un expertSpécifications techniques
Spécifications | Valeur |
---|---|
Bridge resistance | 350 Ω |
Creep - 20 minutes | ±0.1% AL |
Excitation voltage - maximum | 10V |
Excitation voltage - recommended | 10V |
Hysteresis | ±2.0% RL |
Insulation resistance - minimum at 50vdc | 500 MΩ |
Load direction | Compression |
Measurement range | 2000kg, 4000kg |
Non-linearity - terminal | ±2.0% RL |
Overload - safe | 50% RL |
Overload - ultimate | 200% RL |
Rated output - nominal | 2 ±20%mV/V |
Rated output - rationalised | 2.0mV/V |
Rationalisation tolerance | ±1% RL |
Repeatability | ±0.1% RL |
Sealing | IP65 |
Temperature effect on rated output per °c | ±0.04% AL |
Temperature effect on zero load output per °c | ±0.05% RL |
Temperature range - compensated | -10 to +50°C |
Temperature range - safe | -10 to +80°C |
Weight - nominal (excluding cable) | 120g |
Zero load output | ±6% RL |
Produits apparentés
Besoin d'autre chose?
ALS251 Miniature Load Cell
- Stainless Steel
- Low Power Consumption
- Long term stability