E111 Linear Inductive Position Sensor
Mounting: M8 rod eyes, body clamps or M8 threads
Caractéristiques principales
- Intrinsically safe for Gas and Dust to: Ex II 1GD
- Travel set to customer’s requirement
- High durability and reliability
- High accuracy and stability
- Sealing to IP67
- Non-contacting inductive technology to eliminate wear
About the E111 Linear Inductive Position Sensor
The E111 is designed for industrial and scientific feedback applications and is ideal for OEMs seeking good sensor performance for arduous applications in hazardous areas
The unit is highly compact and space-efficient, being responsive along almost its entire length.
It provides a linear output proportional to displacement. Each unit is supplied with the output calibrated to the travel required by the customer, from 0-5mm to 0-800mm and with full EMC protection built in.
The sensor is easy to install with mounting options including M8 rod eye bearings and body clamps. The push rod can be supplied free or captive, with female M8 thread, an M8 rod eye, or dome end, Captive push rods can be sprung loaded, in either direction, on sensors up to 300mm of travel.
The E111 also offers a range of mechanical options. Environmental sealing is to IP67.
As a leading supplier of linear, rotary, tilt and intrinsically safe position sensors, Althen has the expertise to supply a sensor to suit a wide variety of applications.
Avez-vous besoin de ce capteur pour votre prochain projet?
Demandez un devis sans engagement ou envoyez-nous vos coordonnées pour une consultation gratuite et sans engagement. Nos ingénieurs commerciaux vous contacteront dans un délai maximum de 1 à 2 jours ouvrables.
Téléchargements de produits
Parlez à nos experts
Vous ne trouvez pas exactement ce que vous cherchez ? Nous proposons des capteurs et des systèmes de mesure standard, mais nous pouvons également vous aider à concevoir un capteur sur mesure ou une solution de mesure complète. N'hésitez pas à nous contacter pour obtenir des conseils ou un devis.
Parler à un expertSpécifications techniques
Spécifications | Valeur |
---|---|
Body diameter | 35mm |
Frequency response | >10KHz (-3dB) |
Independent linearity | ±0.1% to ±0.5% |
Measurement range | Up to 800mm |
Output signal | 0.5-4.5VDC ratiometric |
Sealing | IP67 |
Produits apparentés
Besoin d'autre chose?
E112 Linear Inductive Position Sensor
- Sealing to IP67
- Intrinsically safe for Gas and Dust to: Ex II 1GD
- Travel set to customer’s requirement
E115 (Submersible) Linear Inductive Position Sensor
- Intrinsically safe for Gas and Dust to: Ex II 1GD
- Travel set to customer’s requirement
- Compact and self-contained