H112 Linear Inductive Position Sensor
Spring loaded with a domed end.
Caractéristiques principales
- Travel set to customer's requirement
- Compact 19mm diameter body
- Sealing to IP67
- Intrinsically safe for Gas and Dust to: Class I, Zone 0 Ex ia / AEx ia
- Non-contacting inductive technology to eliminate wear
- Gauge head positioning for industrial and scientific applications
About the H112 Linear Inductive Position Sensor
The H112 is designed for gauge head positioning in industrial and scientific applications and is ideal for OEMs seeking good sensor performance for arduous applications in hazardous areas.
The incorperated electronics system is CSA approved for use in potentially explosive gas/vapour and dust atmospheres.
Overall performance, repeatability and stability are outstanding over a wide temperature range. It provides a linear output proportional to displacement. Each unit is supplied with the output calibrated to the travel required by the customer, from 5mm to 50mm and with full EMC protection built in.
The sensor is very robust, the body and push rod being made of stainless steel for long service life and environmental resistance.
The plunger is spring loaded with a domed end. The FDH112 is easy to install with a long ½ inch UNF mounting thread and is supplied with two lock nuts for positioning. Environmental sealing is to IP67.
As a leading supplier of linear, rotary, tilt and intrinsically safe position sensors, Althen has the expertise to supply a sensor to suit a wide variety of applications.
Avez-vous besoin de ce capteur pour votre prochain projet?
Demandez un devis sans engagement ou envoyez-nous vos coordonnées pour une consultation gratuite et sans engagement. Nos ingénieurs commerciaux vous contacteront dans un délai maximum de 1 à 2 jours ouvrables.
Parlez à nos experts
Vous ne trouvez pas exactement ce que vous cherchez ? Nous proposons des capteurs et des systèmes de mesure standard, mais nous pouvons également vous aider à concevoir un capteur sur mesure ou une solution de mesure complète. N'hésitez pas à nous contacter pour obtenir des conseils ou un devis.
Parler à un expertSpécifications techniques
| Spécifications | Valeur |
|---|---|
| Body diameter | 19mm |
| Frequency response | >10KHz (-3dB) |
| Independent linearity | ±0.1% to ±0.25% |
| Measurement range | Up to 50mm |
| Output signal | 0.5-4.5VDC ratiometric |
| Sealing | IP67 |
Produits apparentés
Besoin d'autre chose?
H114 (Submersible) Linear Inductive Position Sensor
- High accuracy and stability
- Sealing to IP68 - 10 Bar
- Intrinsically safe for Gas and Dust to: Class I, Zone 0 Ex ia / AEx ia
H115 (Submersible) Linear Inductive Position Sensor
- Compact and self-contained
- Sealing to IP68 - 10 Bar
- Intrinsically safe for Gas and Dust to: Class I, Zone 0 Ex ia / AEx ia