HCD Series LVDT Position Sensor
The perfect choice for high performance measurements in environments containing moisture, dirt, and fluid contaminants
Caractéristiques principales
- Heavy duty model
- Measurement range: 1.27 to 254mm
- Non-linearity: ±0.25% FR
- Output: ±10VDC
- Frequency response: 500Hz or 200Hz
About the HCD series Hermetically Sealed
The HCD Series LVDTs are impervious to dirt, water, steam spray and most corrosives. Tungsten inert gas (TIG) welding provides hermetic sealing that is free from oxidation-producing faults that may cause leakage. They have been qualified at pressures up to 1000 psi (70 bars) and are suitable for numerous high-pressure applications. They are terminated with a glass-sealed, MS-type terminal connector. The connector prohibits the core from passing completely through the coil assembly. HCD units have double magnetic shielding that makes them insensitive to external magnetic influences.
Applications for HCD
- Harsh Industrial Environments
- Ideal for Pressure Installations up to 1,000 psi
- Submersible with Appropriate
- Connector
Options
- Metric Thread Core
- Captive Core Option for Convenient Installation
- Guided Core
- Small Diameter, Low Mass Core
Avez-vous besoin de ce capteur pour votre prochain projet?
Demandez un devis sans engagement ou envoyez-nous vos coordonnées pour une consultation gratuite et sans engagement. Nos ingénieurs commerciaux vous contacteront dans un délai maximum de 1 à 2 jours ouvrables.
Téléchargements de produits
Parlez à nos experts
Vous ne trouvez pas exactement ce que vous cherchez ? Nous proposons des capteurs et des systèmes de mesure standard, mais nous pouvons également vous aider à concevoir un capteur sur mesure ou une solution de mesure complète. N'hésitez pas à nous contacter pour obtenir des conseils ou un devis.
Parler à un expertSpécifications techniques
| Spécifications | Valeur |
|---|---|
| Coil form material | High Density, Glass-Filled Polymer |
| Electrical termination | 6-pin Connector |
| Null voltage | 0 VDC |
| Ripple | Less than 25 mV rms |
| Shock survival | 250 g for 11 milliseconds half sine |
| Stability | 0.125% full scale |
| Survival temperature range | -65°F to 200°F (-55°C to 95°C) |
| Temperature – coefficient of scale factor | 0.04%/°F (0.08 %/°C) |
| Vibration tolerance | 10 g up to 2 kHz |
Produits apparentés
Besoin d'autre chose?
HCI-Series LVDT Position Sensor
- High input impedance
- IEC IP68 rating to 1,000 PSI [70 bars]
- Shock and vibration tolerant
HCT Series LVDT Position Sensor
- Measurement range 6.35 to 254mm
- Non-linearity ±1% to ±0.5% FR
- Output 4-20mA
HLR-Series LVDT Position Sensor
- UL/ULc, ATEX listed
- Ranges of ±1 inch to ±10 inches
- All stainless steel construction