PTS 420 Series LVDT Position Sensor
Ideal choice for process control applications
Caractéristiques principales
- LVDT transmitter
- Low Cost
- Compatible with Process Controllers
- Ideal for Noisy Environments
- Calibration Certificate Supplied with all models
About the PTS 420 Series - Position Transmitter
The PTS 420 linear position transmitter consists of a one-piece linear position sensor and transmitter electronics. Configured for use in two-wire, current loops, the PTS 420 is compatible with most process controllers. Units are available in measurement ranges from 0.25" to 10". Rugged packaging and a large barrier type terminal strip facilitates installation and screwdriver adjustments provide for ease of calibration. Designed with a rain-tight, splash-proof housing, the PTS 420 is suitable for position measurements requiring stem-type valves such as the ones frequently used in process control, power generation, and other related applications. The PTS 420 can also be used for valve position indication, roll gap control in rolling mills, and applications where long cables are required.
Applications for PTS Series
- Process Control
- Air-Handling Systems
- Power Generation
- Filtration/Water Treatment
- Steel, Aluminum, Paper, Rubber,
- and Plastic Rolling Mills
Valve Position Sensing
A PTS 420 is a two-wire current-loop position transmitter especially suited to valve position indication and other position indication in process industries.
Roll Gap Measurement
A typical application of the PTS 420 position transmitter is the measurement of the roll gap in rolling mills for steel, aluminum, and other primary metals. The same transmitter is adaptable to measuring the position of calendering rolls in paper mills, rubber plants, and plastic sheet and film manufacturing facilities.
Sluice Gate Control
The PTS 420 position transmitter can be used to measure the open height of sluice gates in sewage and waste water treatment plants. Other applications include power plant water supplies, potable water filtration plants, flood control dams, and industrial processes.
Avez-vous besoin de ce capteur pour votre prochain projet?
Demandez un devis sans engagement ou envoyez-nous vos coordonnées pour une consultation gratuite et sans engagement. Nos ingénieurs commerciaux vous contacteront dans un délai maximum de 1 à 2 jours ouvrables.
Téléchargements de produits
Parlez à nos experts
Vous ne trouvez pas exactement ce que vous cherchez ? Nous proposons des capteurs et des systèmes de mesure standard, mais nous pouvons également vous aider à concevoir un capteur sur mesure ou une solution de mesure complète. N'hésitez pas à nous contacter pour obtenir des conseils ou un devis.
Parler à un expertSpécifications techniques
| Spécifications | Valeur |
|---|---|
| Controls | Zero and span potentiometers, 10 turn |
| Frequency response | 50Hz @ -3db |
| Housing material | Aluminum alloy |
| Ip rating | IP65 |
| Measurement range | 5.35 to 254mm |
| Non-linearity | ±1.25% to ±0.5% FR |
| Operating temperature range | -25°C to +85°C |
| Output | 4-20mA |
| Stability | 0.05% of FSO, after 30 minute warm up |
Produits apparentés
Besoin d'autre chose?
SI-Series LVDT Position Sensor
- Standard measurement ranges of 1 to 20 inches
- 4 to 20 mA input/output
- Non-linearity of ±0.25% of FRO or better
SQ-Series LVDT Position Sensor
- Rugged, heavy duty construction
- Ranges of ±0.50 inches to ±10.00 inches
- Non-linearity less than ±0.25% of FRO
SSB-Series LVDT Position Sensor
- Long term reliability (20+ years)
- Inconel construction standard
- High pressure applications (to 5,000 psi)