S115 (Submersible) Linear Inductive Position Sensor
LIPS S115 Rugged submersible stand-alone linear inductive position sensor
Caractéristiques principales
- Compact and self-contained
- Travel set to customer's requirement
- High durability and reliability
- High accuracy and stability
- Sealing to IP68 - 10 Bar
- Non-contacting inductive technology to eliminate wear
About the S115 (Submersible) Linear Inductive Position Sensor
The S115 is a heavy-duty version of the S114 sensor with a stronger 12.6mm push rod, recommended for applications where vibration is an issue or there is a need for longer travel sensors which are to be mounted horizontally between rod eyes. It remains an affordable, durable, highaccuracy position sensor designed for applications where the sensor would be completely submerged during normal operation.
Overall performance, repeatability and stability are outstanding over a wide temperature range. It provides a linear output proportional to displacement. Each unit is supplied with the output calibrated to the travel required by the customer, from 0-5mm to 0-800mm and with full EMC protection built in.
The sensor is very robust, the body and push rod being made of 316 stainless steel for long service life and environmental resistance. The sensor is easy to install with mounting options including stainless steel M8 rod eye bearings and body clamps. The push rod can be supplied free or captive, with female M8 thread, an M8 rod eye, or dome end. Captive push rods can be sprung loaded, in either direction. Environmental sealing is to IP68 10 Bar.
As a leading supplier of linear, rotary, tilt and intrinsically safe position sensors, Althen has the expertise to supply a sensor to suit a wide variety of applications.
Avez-vous besoin de ce capteur pour votre prochain projet?
Demandez un devis sans engagement ou envoyez-nous vos coordonnées pour une consultation gratuite et sans engagement. Nos ingénieurs commerciaux vous contacteront dans un délai maximum de 1 à 2 jours ouvrables.
Téléchargements de produits
Parlez à nos experts
Vous ne trouvez pas exactement ce que vous cherchez ? Nous proposons des capteurs et des systèmes de mesure standard, mais nous pouvons également vous aider à concevoir un capteur sur mesure ou une solution de mesure complète. N'hésitez pas à nous contacter pour obtenir des conseils ou un devis.
Parler à un expertSpécifications techniques
Spécifications | Valeur |
---|---|
Frequency response | 10KHz or 300Hz |
Independent linearity | ±0.25% to ±0.5% |
Measurement range | Up to 800mm |
Sealing | IP68 10bar, 100msw, 145psi |
Produits apparentés
Besoin d'autre chose?
S125 (Submersible) Linear Inductive Position Sensor
- Measuring range: 0 to 800 mm
- Sealed to IP68 - 350 Bar, 100msw, 145psi
- Rugged stand-alone sensor
P100 Linear Inductive Position Sensor
- Measuring range: 0 to 600 mm
- Outstanding performance
- Range of mechanical & electrical options
P101 Linear Inductive Position Sensor
- Measuring range: 0 to 600 mm
- Highly durable and accurate
- Full EMC protection built in