8FLP Linear Potentiometer
Conductive Plastic Model with front and rear extended shaft
Caractéristiques principales
- Resistance values 1k, 2k, 5k, 10, 20k (Ω)
- Low-cost potentiometer
- Conductive plastic
- With front and rear extended shaft
- RoHS compliant
About the 8FLP Linear Potentiometer
The 8FLP is a miniature sized and low-cost item with leadwire terminals, a front and rear extended shaft/circle holes and a 10mm stroke.
In the 8FLPA series we have the 8FLP10A and 8FLP15A available.
Special Specifications Available
Spring return device incorporated (friction is approx. 3N [300gf], special electrical stroke (8mm, 12mm), special machining on the shaft.
Special NOTE
When ordering special shaft length of our linear-motion potentiometer, especially models 30LP, 50LP, 8FLP and 15FLP series as standard version with front and rear shaft extension, please be sure to specify the shaft length exactly when the shaft is completely pressed into the housing.
Example: In case of model 8FLP10A standard version As you see from the above right drawing, please specify the exact Length of L1 and L2 when the shaft is completely pressed into the housing. In case of models with spring return device, the condition of spring returned is as right drawing and please specify the exact length of L1 and L2 when the shaft is completely pressed into the housing.
Avez-vous besoin de ce capteur pour votre prochain projet?
Demandez un devis sans engagement ou envoyez-nous vos coordonnées pour une consultation gratuite et sans engagement. Nos ingénieurs commerciaux vous contacteront dans un délai maximum de 1 à 2 jours ouvrables.
Téléchargements de produits
Parlez à nos experts
Vous ne trouvez pas exactement ce que vous cherchez ? Nous proposons des capteurs et des systèmes de mesure standard, mais nous pouvons également vous aider à concevoir un capteur sur mesure ou une solution de mesure complète. N'hésitez pas à nous contacter pour obtenir des conseils ou un devis.
Parler à un expertSpécifications techniques
| Spécifications | Valeur |
|---|---|
| Precision class ±1.0% | |
| Precision class ±10% | |
| Contact resistance variation | Within 2% C.R.V. |
| Dielectric strength | 1 minute at 500V.A.C. |
| Electrical stroke | 11 ±0.5mm |
| Friction | Within 0.3N (30gf) |
| Independent linearity tolerance | Standard class ±2.0% |
| Insulation resistance | Over 1.000MΩ at 500VDC |
| Mass | Approx. 5g |
| Max. practical resistance tolerance | 50kΩ |
| Mechanical stroke | About 12mm |
| Output smoothness | Within 0.1% against input voltage |
| Power rating | 0.2W |
| Resistance temperature coefficient | ±400p.p.m./°C |
| Resolution | Essentially infinite |
| Standard resistance values | 1kΩ, 2kΩ, 5kΩ, 10kΩ, 20kΩ |
| Stopper strength | Ca. 10N (1kgf) |
| Total resistance tolerance | Standard class ±15% |
Produits apparentés
Besoin d'autre chose?
13FLP Series Linear Potentiometer
- Measuring range 12 mm to 100 mm
- Resistance value 500 Ω to 20 kΩ
- Miniature conductive plastic model
15FLP Series Linear Potentiometer
- Measurement range 15 mm and 30 mm
- Resistance value 500 Ω to 10 kΩ
- With front & rear extended shaft
18FLPA Series Linear Potentiometer
- Measurement range 15 mm and 100 mm
- Resistance value: 500 Ω to 20 kΩ
- Robust conductive plastic model