RVIT-15-120i Rotary Inductive Position Sensor
DC operated, non-contact, angular position sensor featuring proprietary Rotary Variable Inductance Transducer technology
Caractéristiques principales
- Extremely long rotational life
- Internal voltage regulation
- Shielded ABEC 3 precision bearings
- Rugged aluminum housing
- Flange mount with shaft seal (optional)
About the RVIT-15-120i Rotary Inductive Position Sensor
The RVIT 15-60 and RVIT 15-120i are DC operated, non-contact, angular position sensors featuring proprietary RVIT (Rotary Variable Inductance Transducer) technology. Operating from a single rail DC voltage supply, they provide either a ±3VDC (RVIT 15-60) or 4-20mA (RVIT 15-120i) output, over a 120 degree angular sensing range.
The RVIT design utilizes a set of four printed circuit coils and a light-weight conductive spoiler to achieve superior performance with a low moment of inertia. During operation, the light weight spoiler rotates with the transducer shaft, differentially altering the inductance of the printed circuit planar coils. The resulting unbalance is precisely measured using a patented autoplex circuit. This signal is then converted to a linear DC output voltage, proportional to the angle of the rotor shaft. The digital circuit is extremely resistant to environmental disturbances such as EMI and RFI, and is compatible for use with most analog position feedback systems.
The RVIT 15-60 and RVIT 15-120i offer exceptional performance at a competitive price along with the interfacing flexibility of the ±3 VDC and 4-20 mA outputs. The RVIT 15-60 emulates a potentiometer in that the output voltage is ratiometric to the supply voltage, within the limits of the specification. Other standard features include a wide operating temp. range, infinite resolution, and an extremely long rotational life. For higher volume applications, specialized options include special angular sensing ranges, and custom unipolar or bipolar output voltage scaling.
Also see our other DC operated, angular position sensor models, R60D (bipolar DC operation, servo size 11 RVIT), R120LC (5VDC operation, low cost RVIT) and R30D (bipolar DC operated RVDT).
Applications for RVIT-15-120i
- Ball valve position
- Throttle level feedback
- Rotary actuator feedback
- Dancer arm position
- Reeler / Dereeler
Avez-vous besoin de ce capteur pour votre prochain projet?
Demandez un devis sans engagement ou envoyez-nous vos coordonnées pour une consultation gratuite et sans engagement. Nos ingénieurs commerciaux vous contacteront dans un délai maximum de 1 à 2 jours ouvrables.
Téléchargements de produits
Parlez à nos experts
Vous ne trouvez pas exactement ce que vous cherchez ? Nous proposons des capteurs et des systèmes de mesure standard, mais nous pouvons également vous aider à concevoir un capteur sur mesure ou une solution de mesure complète. N'hésitez pas à nous contacter pour obtenir des conseils ou un devis.
Parler à un expertSpécifications techniques
| Spécifications | Valeur |
|---|---|
| Angular range | 0 to 120 degrees |
| Bearings | ABEC 3 precision, matched and preloaded |
| Electrical connection | 3 conductor cable, AWG 26, under PVC jacket, 12 inches [30cm] long |
| Frequency response | 25Hz @ -3dB |
| Housing material | Aluminium, black anodize |
| Input current | 41mA |
| Input voltage | 10 to 28VDC (not to exceed 30VDC) |
| Maximum torque | 0.12 inch.ounce-force [8.6 gram-force.cm] |
| Mechanical angular range | 360 degrees (no stops) |
| Mounting | Size 15 servo mount BU-ORD (standard) or Flange mount with shaft seal (with accessory) |
| Output at range ends (*) | 1 to 5VDC (with 250 Ohm loop resistor) |
| Output current | 4 to 20mA |
| Output impedance | 250O maximum |
| Repeatability & hysteresis | 0.1% of FRO maximum |
| Sensitivity (*) | 0.133 mA/degree |
| Shaft load capability | 10 lb [4.5Kg] Axial and Radial |
| Temp coefficient of output | ±0.02% of FSO per ºF [0.036% of FSO per ºC], over operating temp. range |
| Temp. range | -67°F to +257°F [-55°C to 125°C] Storage |
| Weight | 2.5 oz [70grams] |
Produits apparentés
Besoin d'autre chose?
R60D Rotary Inductive Position Sensor
- Angular range: ±60°
- -55°C to 125°C operating temperature
- Low moment of inertia
P500 Rotary Inductive Position Sensor
- Calibrated between 16° to 160°
- Durable, high-accuracy sensor
- Infinite resolution
P501 Rotary Inductive Position Sensor
- Calibrated between 30° to 140°
- Compact, durable and reliable
- Angle set to customer’s requirement