Caractéristiques principales

ATEX and IECEx approval
EX I (M1), EX (1)GD certified
Super fast 4.7kHz (-3dB) bandwith
Wide power supply range
Voltage and current output options
Three or five wire mode connection

About the X005 Galvanic Isolation Amplifier

The X005 has been designed specifically for use with Intrinsically Safe position sensors and is certified intrinsically safe I and IIC.

The Intrinsically Safe sensors are ratiometric i.e. the output signal scales with the supply voltage. To ensure the safe area signal accurately corresponds with sensor displacement it is important that the sensor supply is correct.

The X005 Galvanic Isolation Amplifier provides a regulated and resistively limited +5V dc power supply required by the Intrinsically Safe sensors. It can be connected in three or five wire modes. Used in five wire mode positive and negative sense inputs enable the X005 to dynamically adjust the sensor supply thus ensuring the correct voltage across the sensor. Connected in this way the X005 can compensate for 15Ω conductor resistance.

The sense terminals are linked internally so the end user can use the X005 in three wire or five wire mode without the need to fit or remove external links.

The X005 has an input power supply range of 12 to 30 volts dc, making it suitable for a wide range of hazardous area applications. It is tri-port isolated providing isolation between the amplifier power supply, the hazardous area and the X005 output signal. The sensor supply and output are transformer coupled providing 2.5kV isolation between the safe and hazardous area circuits eliminating the requirement for a high-integrity earth.

The output is configured to either 0.5 to 9.5V or -20mA and has a bandwidth of 4.7kHz, making it ideal for servo control loops.

Avez-vous besoin de ce capteur pour votre prochain projet?

Demandez un devis sans engagement ou envoyez-nous vos coordonnées pour une consultation gratuite et sans engagement. Nos ingénieurs commerciaux vous contacteront dans un délai maximum de 1 à 2 jours ouvrables.

Parler à un expert

Téléchargements de produits

X005 galvanic isolation amplifier en

Parlez à nos experts

Vous ne trouvez pas exactement ce que vous cherchez ? Nous proposons des capteurs et des systèmes de mesure standard, mais nous pouvons également vous aider à concevoir un capteur sur mesure ou une solution de mesure complète. N'hésitez pas à nous contacter pour obtenir des conseils ou un devis.

Parler à un expert

Spécifications techniques

Spécifications	Valeur
	-40°C to +100°C storage
	Approximately 70mA (current O/P)
	Ex II (1) GD
Ambient temperature range	-20°C to +60°C working
Atex approval	Ex I (M1)
Bandwidth	DC to 4.7kHz (-3db)
Current consumption (24v supply)	Approximately 50mA (voltage O/P)
Current loop	4-20mA, load resistance 0-1KΩ
Electromagnetic compatibility	EN561236-2-1:2006 (EN31326-1:2006)
Housing	97.3 x 22.5 x 111.9mm
Isolation	2500V between safe area terminals and hazardous area terminals, 50V between power rail (J4) and optput (J3)
Lead resistance for 15ma	15Ω max (all connections)
Mounting	35 x 7.5mm top-hat rail (DIN 46277-3)
Non-linearity	<+/- 0.1% FS
Protection class	IP20
Rise time	<200μs for 10-90% step change
Sensor input resistance	>5MΩ
Sensor supply	5V at 15mA max
Setting time to 1% of span	<300μs for 10-90% step change
Temperature drift	<0.01% FS/°C for voltage outputs
Voltage	0.5-9.5V - output resistance 5Ω
Voltage	24V DC nom 12V-30V