RSE RVDT

Ideal for measuring the position of quarter-turn valves, flue dampers, weir gates, mail sorters, conveyor check weighing systems, dancer arm tensioners, and a myriad of other applications involving fractional-turn shaft movements

Caractéristiques principales

0º to 30º, 60º, 90º, or 120º rotational ranges
Full 360º rotation contactless technology
Non-linearity less than ±0.1% of FRO
DC voltage absolute analog outputs
Environmentally sealed to IEC IP-66
Integral DC-in / DC-out electronics

About the RSE RVDT

The RSE series of contactless, fractional-turn, absolute output rotary position sensors are ideal for measuring the position of quarter-turn valves, flue dampers, weir gates, mail sorters, conveyor check weighing systems, dancer arm tensioners, and a myriad of other applications involving fractional-turn shaft movements. They are also useful for high reliability applications such as pedal, throttle-lever, or actuator position sensing in aircraft, marine, construction, and agricultural vehicles.

RSE 1500 series sensors provide an analog voltage output proportional to shaft rotation over a total range of 120°. They utilize built-in electronics offering DC input/output configurations and are available for 0° to 30°, 60°, 90°, or 120° rotation ranges with a true 0-to-10 V DC unipolar output. Normal electrical I/O termination is a 5-pin M-12 connector receptacle, but on special order for OEMs other connectors or cables can be supplied. Please contact us for more information. RSE 1500 series rotary sensors are enclosed in a 1-1/2 inch diameter anodized aluminum shell, and have a 0.250 inch stainless steel shaft running in high performance ball bearings.

Applications for RSE

Quarter-turn valves
Mail sorter gates
Flue dampers
Throttle position
Dancer arm tensioning
Fuel rack position

Avez-vous besoin de ce capteur pour votre prochain projet?

Demandez un devis sans engagement ou envoyez-nous vos coordonnées pour une consultation gratuite et sans engagement. Nos ingénieurs commerciaux vous contacteront dans un délai maximum de 1 à 2 jours ouvrables.

Parler à un expert

Téléchargements de produits

Rse rvdt en

Parlez à nos experts

Vous ne trouvez pas exactement ce que vous cherchez ? Nous proposons des capteurs et des systèmes de mesure standard, mais nous pouvons également vous aider à concevoir un capteur sur mesure ou une solution de mesure complète. N'hésitez pas à nous contacter pour obtenir des conseils ou un devis.

Parler à un expert

Spécifications techniques

Spécifications	Valeur
Frequency response	50 Hz (-3dB) (nominal)
Full scale output	0 to 10 Volts DC
Input power	13.5 to 26.5 Volts DC, 25 mA max.
Linearity error	<±0.1% of FRO
Operating temperature	-40°C to +85°C
Output	<100 Ω
Output noise & ripple	<5 mVrms
Resolution	0.025% of FRO
Shock survival	100 g, 11 ms
Thermal coefficient of scale factor	±0.01% FRO/°C (nominal)
Vibration tolerance	10 g, 50 to 2000 Hz