1. Althensensors
  2. Capteurs
  3. Capteurs de pression
  4. Capteurs de pression miniatures
  5. MP40 Miniature Pressure Transducer

MP40 Miniature Pressure Transducer

Flush mount pressure transducer


Caractéristiques principales

  • Flush-mountable, cost-effective pressure transmitters
  • Absolute or sealed reference options
  • Strong signal / strong full scale
  • Versions with long-term stability
  • High vibration options
  • Manufactured from corrosion-resistant titanium (6AL4V)
  • Excellent performance in corrosive media

About the MP40 Miniature Pressure Transducer

The MP40 model is a miniature pressure transducer with a flush diaphragm for general pressure measurement applications. The transducersvare made of corrosion-resistant titanium (6AL4V). The inside of the flush diaphragm is fitted with high-quality semiconductor strain gauges that convert the deflection of the diaphragm into an electrical signal.Thanks to the hermetically sealed reference side made of titanium, the MP40 series transducers can also be supplied for absolute pressure and reference pressure (enclosed) as an option. The hermetically sealed head section of this option is located directly behind the strain gauge diaphragm area of the sensor. By sealing the sensitive strain gauges, a considerable improvement and reliability of the transducer is achieved.

Versions with increased long-term stability and for high vibration resistance, but also with integrated electronics (4 ... 20 mA) are optionally available (for technical data, see separate data sheet MP402).

Applications

  • Process engineering
  • Measuring and testing systems
  • Research and development
  • Laboratory devices and equipment
  • Level measurement
  • Process control

Avez-vous besoin de ce capteur pour votre prochain projet?

Demandez un devis sans engagement ou envoyez-nous vos coordonnées pour une consultation gratuite et sans engagement. Nos ingénieurs commerciaux vous contacteront dans un délai maximum de 1 à 2 jours ouvrables.

Parler à un expert

Téléchargements de produits

Parlez à nos experts

Vous ne trouvez pas exactement ce que vous cherchez ? Nous proposons des capteurs et des systèmes de mesure standard, mais nous pouvons également vous aider à concevoir un capteur sur mesure ou une solution de mesure complète. N'hésitez pas à nous contacter pour obtenir des conseils ou un devis.

Parler à un expert

Spécifications techniques

Spécifications Valeur
Acceleration 100g any axis
Accuracy 0.25% to 0.5%
Burst pressure 6.0x Range
Compensated temperature -1 °C to 54 °C (30° to 130°F)
Input resistance (nominal) 1400 ± 400 Ohm
Insulation resistance minimum 50 MOhm @ 50 VDC
Maximum voltage 30 V for short periods
Measurement range 0 - 1 bar to 0 - 700 bar
Media compatibility Liquids & Gases compatible with Titanium 6AL4V
Operating temperature -18°C to 82°C (0° to 180°F)
Output 20 mV/V [5 VDC]
Output resistance (nominal) 850 ± 200 Ohm
Over pressure 2.0x Range
Pressure type gauge, absolute
Usable pressure 3.0x Range

Produits apparentés

Besoin d'autre chose?

MP402 Miniature Pressure Transducer

  • Measuring range: 0 - 0.35 to 0 - 700 bar
  • 0.5% to 0.25% measuring accuracy
  • Made of corrosion-resistant titanium
Datasheet Voir le produit

XPC10 Miniature Pressure Sensor

  • Measuring range: 0 - 10 to 0 - 500 bar
  • Operating temperature: -40 to 220 ºC
  • For static and dynamic applications
Datasheet Voir le produit