XPM4 Miniature Pressure Transducer
Miniature threaded pressure transducer
Caractéristiques principales
- Measuring ranges 0 ... 5 bar to 0 ... 200 bar, absolute and relative pressure
- Linearity deviation 0.35 % to 0.5 %
- Output 10 mV/V (3 mV/V for 5 bar and 6 mV/V for 10 bar)
- Supply voltage 10 VDC
- Flush diaphragm
- Titanium construction
- Insensitive to installation torque
- M4 x 0.7 thread
About the XPM4 Miniature Pressure Transducer
The XPM4 is a miniature pressure sensor that has been developed for
measuring static and dynamic pressures in a wide range of applications.
With a titanium housing and flush diaphragm, the sensor can also be used
in many corrosive environments.The XPM4 uses SanShift™ technology, which largely eliminates zero deviations caused by torques during installation. The sensor element consists of a temperature-compensated Wheatstone bridge made of highly stable, micromechanically manufactured silicon strain gauges. The electrical connection is made via a connection cable with strain relief spring; a plug-in connection is also available as an option.
Features
- Measuring ranges 0 ... 5 bar to 0 ... 200 bar, absolute and relative pressure
- Linearity deviation 0.35 % to 0.5 %
- Output 10 mV/V (3 mV/V for 5 bar and 6 mV/V for 10 bar)
- Supply voltage 10 VDC
- Flush diaphragm
- Titanium construction
- Insensitive to installation torque
- M4 x 0.7 thread
- Linearity up to ±0.35%
- For static and dynamic applications
- Cable connection, optionally with plug
Applications
- aeronautics
- Explosion test benches
- Kiln monitoring equipment
- Robots and effectors
- Laboratory and research
Avez-vous besoin de ce capteur pour votre prochain projet?
Demandez un devis sans engagement ou envoyez-nous vos coordonnées pour une consultation gratuite et sans engagement. Nos ingénieurs commerciaux vous contacteront dans un délai maximum de 1 à 2 jours ouvrables.
Téléchargements de produits
Parlez à nos experts
Vous ne trouvez pas exactement ce que vous cherchez ? Nous proposons des capteurs et des systèmes de mesure standard, mais nous pouvons également vous aider à concevoir un capteur sur mesure ou une solution de mesure complète. N'hésitez pas à nous contacter pour obtenir des conseils ou un devis.
Parler à un expertSpécifications techniques
| Spécifications | Valeur |
|---|---|
| Accuracy | 0.35% to 0.5% |
| Dimensions | Hex 8 mm [ Hex .315 in ] |
| Measurement range | 0 - 5 bar to 0 - 200 bar (0 - 75 to 0 - 3000 psi) |
| Operating temperature | -40 to 120 °C [ -40 to 248 °F ] |
| Options | Cable Length, Compensation Temperature Range, Connector Output, IP67 Protection, Non-standard Power Supply Calibration |
| Output | 3 to 10 mV/V [10 VDC], depending on range |
| Overpressure | 2X FS |
| Port material | Titanium |
| Pressure port/fitting | M4x0.7 Male |
| Pressure type | gauge, absolute, sealed |
Produits apparentés
Besoin d'autre chose?
XPM6 Miniature Pressure Sensor
- Pressure from 100 to 1,000 bar
- For static and dynamic applications
- Linearity ±0.25 % FS
XPM10 Miniature Pressure Sensor
- Measuring range: 0 - 1 to 0 - 350 bar
- 0.25% to 0.35% accuracy
- For static and dynamic applications
XPR46 Miniature Pressure Transducer
- Measuring range: 0.5 to 100 bar
- -40°C to +120°C Operating temperature
- Flush diaphragm, titanium construction