APS Absolute Pressure Transducer
Low-range pressure sensor
Caractéristiques principales
- Measurement ranges from 0.1 mbar to 1000 mbar
- Series DPS: positive and negative gauge pressure, differential pressure, optional bi-directional
- Series APS: absolute pressure
About the APS Absolute Pressure Transducer
The pressure transducers of the DPS type series are suitable for detection of positive and negative gauge pressure or differential pressure of non-aggressive gases. Optional there is an absolute pressure version APS available. These robust versions can be applied in laboratories and under industrial conditions. Important criteria such as long-term stability, linearity and good reproducibility are guaranteed through their sturdy mechanical construction. Temperature drift is minimised through targeted compensation of every sensor. The wear-free inductive measurement system allows for almost maintenance-free operation.
The integrated electronic system provides a pressure-proportional voltage signal output of 0 … 10 V (option: current signal 0(4) …20 mA). This allows an interference-free transmission of signals even over comparatively large distances. For strongly varying pressures a dampening function is included.
Applications APS
- HVAC
- Clean room technology
- Medical technology
- Filter technology
- Finishing pass measurement
- Level measurement (bubbling-through method)
- Flow velocity measurement (pitot tube, orifice disk)
Avez-vous besoin de ce capteur pour votre prochain projet?
Demandez un devis sans engagement ou envoyez-nous vos coordonnées pour une consultation gratuite et sans engagement. Nos ingénieurs commerciaux vous contacteront dans un délai maximum de 1 à 2 jours ouvrables.
Téléchargements de produits
Parlez à nos experts
Vous ne trouvez pas exactement ce que vous cherchez ? Nous proposons des capteurs et des systèmes de mesure standard, mais nous pouvons également vous aider à concevoir un capteur sur mesure ou une solution de mesure complète. N'hésitez pas à nous contacter pour obtenir des conseils ou un devis.
Parler à un expertSpécifications techniques
Spécifications | Valeur |
---|---|
Accuracy | 1.0% |
Electrical connections | Cable gland M12 x 1.5, screw terminals 1.5 mm² max. |
Housing | Material ABS |
Humidity | Up to 80 % relative humidity |
Long-term stability | ±0.5 % per year (typical) |
Measurement range | barometric: 900 - 1100 mbar, 800 - 1200 mbar; absolute: 0 - 1000 mbar, 0 - 500 mbar |
Output | 0 - 10 V [19 - 31 VDC], ±5 V [19 - 31 VDC], ±10 V [19 - 31 VDC], 0 - 20 mA [19 - 31 VDC], 4 - 20 mA [19 - 31 VDC], 4 - 20 mA 2w [12 - 32 VDC] |
Pressure connections | 6.6 diameter x 11 mm (for flexible hoses 6 diameter) |
Priciple | Inductive |
Protection class | II |
Sealing | IP54 |
Sensor volume | Approx. 3 ml |
Shock resistance | 10 g |
Standards | EN 61010-1; 2. (08/2002), EN 61000-6-3 (05/2006), EN 61000-6-1 (10/2007), EN 61000-6-2 (03/2006) |
Storage temperature | -10 to +70 °C |
Temperature | Specified range +10 to +50 °C |
Volume increase | Approx. 0.2 ml at rated pressure |
Weight | Approx. 0.3 kg (approx. 0.4 kg incl. power pack) |
Produits apparentés
Besoin d'autre chose?
AST2000 Hydrogen Pressure Transducer
- Measuring range: 0 - 2 to 0 - 700 bar
- For hydrogen pressure sensing applications
- With high performance digital compensation