1. Althen Sensors
  2. Instrumentation
  3. Instrumentation d'automatisation Numérique
  4. Amplificateurs de mesure avec interfaces bus (OIML)
  5. LCB3A Hygienic Universal Load Cells Digitizer
  • LCB3A_1 Amplificateur de mesure universel
  • LCB3A_2 Amplificateur de mesure universel

LCB3A Hygienic Universal Load Cells Digitizer

Universal measuring amplifier for load cells with integrated analog/digital converter


Caractéristiques principales

  • Hygienic device RPSCQC authorized by 3-A SSI
  • Optional fieldbuses
  • Micro USB port
  • 16-bit Analog output: 0/4-20 mA; 0-5/10 V (optional)
  • RS485 port (optional)
  • Direct connection between RS485 and RS232 without converter
  • 2 logic inputs, 3 relay outputs
  • Single loading batchings, max 99 formulas
  • Mounting: wired or integral to the load cell body via standard ¼ GAS fitting

About the LCB3A

Digitizer/Weight Trasmitter for load cells conceived with an eye on IoT
(Internet of Things). Three M12 hygienic connectors with solder terminals. Six indicator led of the communication interface. Dimensions: 90x40x107 mm including connectors.IP67 junction box made of stainless steel AISI 304, certified 3-A Sanitary Standards.

LCB Digitizer transforms an analog load cell (output mV/V) into digital and can also be used on existing load cells or strain gauge sensors. Designed for an assembly/wiring integral with the load cell body, it can be connected by fieldbus to PLCs of the most important international brands. The weight calculation frequency reaches up to 500 values a second and also the update frequency of the data on the fieldbus can reach the maximum speed of 500 updates a second, when using the PROFINET, EtherNet/IP and EtherCAT buses.

Key Features

  •  Hygienic device RPSCQC authorized by 3-A SSI
  • Optional fieldbuses: PROFINET IO, Ethernet/IP, Ethernet TCP/IP, Modbus TCP, PROFIBUS DP, EtherCAT, POWERLINK, CANopen, CC-Link, CC-Link, IE Field Basic, SERCOS III, IO-LINK
  • Micro USB port
  • 16-bit Analog output: 0/4-20 mA; 0-5/10 V (optional)
  • RS485 port (optional)
  • Direct connection between RS485 and RS232 without converter
  • 2 logic inputs, 3 relay outputs
  • Single loading batchings, max 99 formulas
  • Mounting: wired or integral to the load cell body via standard ¼ GAS fitting

Avez-vous besoin de ce capteur pour votre prochain projet?

Demandez un devis sans engagement ou envoyez-nous vos coordonnées pour une consultation gratuite et sans engagement. Nos ingénieurs commerciaux vous contacteront dans un délai maximum de 1 à 2 jours ouvrables.

Parler à un expert

Parlez à nos experts

Vous ne trouvez pas exactement ce que vous cherchez ? Nous proposons des capteurs et des systèmes de mesure standard, mais nous pouvons également vous aider à concevoir un capteur sur mesure ou une solution de mesure complète. N'hésitez pas à nous contacter pour obtenir des conseils ou un devis.

Parler à un expert

Spécifications techniques

Spécifications Valeur
A/d converter 24 bit (16000000 points) - 4.8 kHz
Conversions per second 500/s
Decimals / display increments 0÷4 / x1 x2 x5 x10 x20 x50 x100
Digital inputs 2 - 5÷24 VDC
Divisions (with measurement range ±10 mv and sensitivity 2 mv/v) ±999999 / 6.6 nV/d
Hermal drift / analog output thermal drift <0.0005% full scale/°C / <0.003% full scale/°C
Linearity / analog output linearity <0.01% full scale / <0.01% full scale
Measurement range ±26 mV
Micro usb port B type - USB 2.0 (full-speed)
Number of load cells / load cells supply up to 4 (350 Ω) - 4/6 wires / 3.3 VDC/40 mA
Power supply and consumption 12÷24 VDC ±10%; 5 W
Relay outputs 3 - max 115 VAC/150 mA - 24 VDC/200 mA
Usable load cells sensitivity ±7 mV/V