FDVKP Automated Wheel Sets Control System
Designed for making automatic measurement of 27 geometric parameters of wheel pairs of wagons
About the FDVKP Automated Wheel Sets Control System
The system is designed for making automatic measurement of 27 geometric parameters of wheel pairs of wagons in the course of incoming and outgoing inspections carried out in railcar/wheel shops, wagon depots and wheelpair repair and gathering workshops.
Parameters FDVKP
- Wheel parameters: out-of-roundness, deviation of roll surface countour from desired profile, wheel flange parameters, wheel tread width and thickness, defects on rolling surface, and wheel separation distance.
- Axle journal parameters: average diameters underneath the first and second bearings, out-of-roundness and taper.
- Axle parameters: diameters and ovality of pre-wheel-seat parts, diameters of wheal seats and middle parts of axle.
Avez-vous besoin de ce capteur pour votre prochain projet?
Demandez un devis sans engagement ou envoyez-nous vos coordonnées pour une consultation gratuite et sans engagement. Nos ingénieurs commerciaux vous contacteront dans un délai maximum de 1 à 2 jours ouvrables.
Parlez à nos experts
Vous ne trouvez pas exactement ce que vous cherchez ? Nous proposons des capteurs et des systèmes de mesure standard, mais nous pouvons également vous aider à concevoir un capteur sur mesure ou une solution de mesure complète. N'hésitez pas à nous contacter pour obtenir des conseils ou un devis.
Parler à un expertSpécifications techniques
| Spécifications | Valeur |
|---|---|
| Full time of control | No more than 4 minutes |
| Maximum power consumption | No more than 5kW |
| Measurement error for other parameters | 0,1mm |
| Measurement error for parameters of axle journal | No more than 4µm |
| Measurement error for parameters of pre-wheel-seat part | 4µm |
| Measurement range for diameter of axle journal | 129,0 - 130,5mm |
| Measurement range for diameter of middle part of axle | 150mm - 175mm |
| Measurement range for diameter of pre-wheel-seat part | 163,5 - 166,0mm |
| Measurement range for wheel diameter | 850mm - 965mm |
| Measurement range of for diameter of wheel seat part | 180 - 200mm |
| Number of rolling surface contours that can be controlled | No less than 600 |
| Overall dimensions fo the systems | 3200mm x 2700mm x 2900mm |
| System weight | 4000kg |