1. Althensensors
  2. Instrumentation
  3. Amplifiers & indicators
  4. Strain gauge amplifiers
  5. SG-2K-KS Strain Gauge Amplifiers

SG-2K-KS Strain Gauge Amplifiers

Dual Channel Strain Gauge Amplifier for DIN Top Hat Rail Mounting


About the SG-2K-KS Strain Gauge Amplifiers

The dual-channel SG-Amplifier allows supply and signal evaluation of two transducers with a strain gauge full bridge greater than 300 ohms. The connecting of the transducers, which should have a full bridge resistance greater than 300 ohms, can be done in 4-wire-technology or, by using a long connecting cable or variable length of the connecting cable, in 6-wire-technology. For further evaluation standard analogue outputs are available. The measuring amplifier is installed in a plastic enclosure (IP20) which is intended for the top hat rail mounting. The amplification per channel can be adapted by an internal precision resistance.

The potentiometers Zx (Zero) and Gx (Gain), which are accessible via the enclosure cover, allow a calibration correction for each channel.

 

Key features SG-2K-KS

  • Supply voltage 10 - 18 VDC / 18 - 30 VDC
  • Analogue output 0 - 10 V / ±10 V / 4 - 20 mA
  • Plastic enclosure (IP20) for DIN-top hat rail mounting
  • Dimensions (W x H x D) 100 x 73.2 x 118.2 mm

Do you need this sensor for your next project?

Request a no-obligation quote or send us your contact details for a free, no-obligation consultation. Our sales engineers will then contact you within a maximum of 1 to 2 working days.

Talk to an expert

Talk to our experts

Not exactly what you are looking for? We offer standard sensors, but can also help you with sensors adapted for you or a fully customised measurement solution. Contact us for advice or pricing.

Talk to an expert

Technical Specifications

Specification Value
Analogue output 0 - 10 V / ±10 V , max. 1 mA (short-period short-circuit proof) 4 - 20 mA, max. 500 Ω
Dimension (b x h x d) 100 x 73.2 x 118.2 mm
Electrical connection Screw terminals
Enclosure Plastic enclosure for top hat rail mounting (IP20)
Input resistance >3 MΩ
Isolating proof voltage input to output 200 V, higher isolated proof voltage on request
Limit frequency (-3 db) 1 kHz, optionally up to 30 kHz
Max. input sensitivity 100 mV/V at ±5 VDC excitation supply
Non-linearity ±0.05 % FSO
Number of measuring channels 2 (full bridge resistance >300 Ω)
Power consumption max. 5 W
Strain gauge excitation supply ±2.5 VDC / ±5 VDC
Supply voltage 10 - 18 VDC, 18 - 30 VDC, electronics protected against reversal voltage
Temperature, operating 0 to +50 °C
Temperature, storage -20 to +60 °C
Weight 450 g