Graphtec GL7000 Modular Datalogger

Modern data loggers, such as the GL7000 can do much more than simply capture data. Through integrated intelligence, data can be combined, interpreted and analyzed. Data can also be used as a trigger: a data logger can be set to start capturing data when a certain signal comes from the sensor. Moreover, the data logger itself can determine which data is interesting and record it at high frequency while recording the rest at a lower sample rate. In this way, memory is used as efficiently as possible.

A data logger consists of a programmable microprocessor, a storage medium, at least one interface, and one or more channels for connecting sensors. An analog-to-digital converter then converts this data to "memory-compatible" data and then writes it to the built-in memory, an SD card or a USB flash drive. The recorded data can then be analyzed directly on the data logger or transferred to a computer and evaluated there.

We can supply a complete configuration with the necessary interface modules so that you can connect every possible sensor in your setup directly and easily. In this we like to think with you, together draw up a measurement plan suitable for the application. In this case, we provide both hardware and software preparation, connectors, cabling, signal processing modules (GLET), but also the calibration data of the various sensors are programmed directly. In short, after receiving the system, you can connect everything simply and quickly.