1. Althensensors
  2. Instrumentatie
  3. Signaalversterkers & Indicators
  4. Meetversterker voor vibratiesensoren
  5. M14 5.2.2 Universal Vibration Monitor

M14 5.2.2 Universal Vibration Monitor

For vibration monitoring in time or frequency domain


Belangrijkste kenmerken

  • Extremely flexible
  • True RMS and true peak measurement
  • Programmable high pass and low pass frequencies
  • 500 lines FFT with 10 free adjustable alarm bands for frequency selective monitoring
  • 2 Relay outputs with adjustable threshold for warning and alarm
  • Insulated current loop output (4 .. 20 mA) for RMS or peak
  • AC output for signal analyzers, recorders or scopes

About the M14 5.2.2 Universal Vibration Monitor

  • Vibration monitoring in time or frequency domain
  • Monitoring of vibration velocity (severity) of rotating machinery to ISO 20816-1 (formerly ISO 10816-1) and reciprocating engines to ISO 10816-6
  • Monitoring of bearing vibration with frequency analysis
  • Remote maintenance via RS-485 connection to PLC
  • Visualization of machine condition via digital networks
  • Emergency shut-off or alarm tripping in case of increasing vibration, e.g. at pumps, compressors, centri-fuges, fans, mixers, mills etc.
  • Production quality control

Properties

  • Extremely flexible
  • Setup and measurement via RS-485 bus at rear and front side USB interface
  • Monitoring of vibration acceleration or velocity
  • True RMS and true peak measurement
  • Programmable high pass and low pass frequencies
  • 500 lines FFT with 10 free adjustable alarm bands for frequency selective monitoring
  • 2 Relay outputs with adjustable threshold for warning and alarm
  • Teach-in function sets the warning / alarm limits auto-matically based on the current vibration level / spectrum
  • Insulated current loop output (4 .. 20 mA) for RMS or peak
  • AC output for signal analyzers, recorders or scopes
  • LED bar graph display for vibration signal and threshold
  • Time-saving installation by snap attachment on 35 mm DIN rails including connection of power supply and RS-485 via DIN rail connectors

Heeft u deze sensor nodig voor uw project?

Vraag een vrijblijvende offerte aan of stuur ons uw contactgegevens voor een gratis en vrijblijvend gesprek. Onze sales engineers nemen dan binnen maximaal 1 tot 2 werkdagen contact met u op.

Praat met een expert

Praat met onze experts

Niet precies wat u zoekt? Wij bieden standaard sensoren, maar kunnen u ook helpen met voor u aangepaste sensoren of een volledig op maat gemaakte meetoplossing. Neem contact met ons op voor advies of prijzen.

Praat met een expert

Technische specificaties

Specificaties Waarde
Frequency ranges 5 .. 1400 Hz; 50 .. 11 000 Hz
Gain 1 / 10 / 100 and autoranging; programmable
Input Voltage input, RI > 1 MΩ, AC coupled, IEPE compatible
Number of spectral lines 500
Sensor supply 3.5 .. 4.5 mA constant current; US > 24 V; activated via interface command
Suitable sensors IEPE compatible(1); sensitivity: 0.8 .. 12 mV/ms² (8 .. 120 mV/g) programmable
Vibration acceleration (high pass; low pass filters) 0,3 / 5 / 10 / 20 / 50 / 100 / 200 / 500 / 1000 Hz; 0,1 / 0,2 / 0,5 / 1 / 2 / 5 / 11,5 kHz (-3 dB)