ASC 75C1 Piëzoresistieve Accelerometer

---

About the ASC 75C1 Piezoresistive Accelerometer

The accelerometers are based on an advanced piezoresistive MEMS technology and can be used in a low frequency response up from 0Hz. The piezoresistive sensor element is made of monolithic resistors. These resistors are attached to carrier-elements and are electrically connected in a Wheatstone bridge. The electrical signal changes proportional to the vibration.

The model ASC 75C1 is a triaxial accelerometer based on piezoresistive technology. Each axis is working independently as a 4-wire system. The ASC 75C1 is a small and compact accelerometer. The housing is a flat design in hard anodised aluminium.

The compact cube form facilitates mounting on different sites. Due to their low mass these sensor models are ideal for testing on light-weight structures. The sensing element in the models has integrated overload stops and therefore the silicon chip is highly shock resistant. The sensors have an excellent non-linearity over a wide frequency response. Electrically they are configured as a full Wheatstone bridge.

The models can be obtained with all common sensor ID modules. A very high flexible cable provides a simple mounting. The ASC 75C1 is equipped as standard with 6 meter of rugged Polyurethane cable.

Key features ASC 75C1

• Triaxial
• Wheatstone Bridge
• mV Output
• Aluminium Housing
• Made in Germany
• Range: 500g, 1000g and 2000g
• Small Size
• Light Weight
• DC Response
• ±5000g Shock Resistance
• Gas Damped
  
  

Options ASC 75C1

• Customised Cable Length
• Customised Connector
• TEDS Module
• Shunt Resistor
• Equipment Exchange (EQX)
  
  

Applications ASC 75C1

• Automotive Crash Testing
• Shock Testing

---