MF Turns-counting Dials Analog Type Rotatie Potmeter
Draaien tellende wijzerplaten Potentiometer met analoge uitlezing
Belangrijkste kenmerken
- Read-out: Analog
- Outer dimensions (mm): 15x18.5
- Max. Number of turns-counting: 10
- Macthing shaft dia. (mm): 3, 3.175, 4, 6, 6.35
- Lock device: Yes
About the MF Turns-counting Dials Analog Type Potentiometer
The MF series is available in four sizes, all having an international patented flexible coupling inside.
Turns-counting dials Potentiometers are designed for use with Helicalohm Potentiometers and multi-turn potentiometers. They have a elegant appearance and rigid construction offering an easy reading, smooth rotation and accurate counting.
Special Specifications Available
Flexible coupling incorporated MF dial is provided with a flexible coupling situated between te shaft of the potentiometer to be mounted and inner dial knob and therefore, the connection is entirely free and only the force of rotating direction is transmittable. With such unique device, traditional trouble such as irregular rotation and ununiform torque due to inaccurate mounting of the potentiometrer on dial can be easily solved. Even the unskilled can mount this MF dial and you can save the labor cost using this MF dial.
Note: When rotating MF dial mounted with multi-turn potentiometer with over 20N (2kgf.) force, the flexible coupling may be damaged or broken. So, please take care of this fact during its operation.
How to mount MF Series
The mounting adaptor as well as specially shaped nut only for use with Model MF Series Dials and
Helicalohm pot. are fixed on the panel according to the illustration given above. The shaft of the Helicalohm pot. is turned anticlockwise to its limit and is put into the mounting hole of the dial which was already set at "0".
At the same time, 4 projections of the mounting adaptor are inserted in 4 receiving holes prepared on the base plate of the dial and then all parts should be pressed to the panel firmly to eliminate any space. The shaft of the potentiometer is fixed by the hexigonal nut positioned in the knob of the dial by screwing it with an attached hexagonal wrench.
Heeft u deze sensor nodig voor uw project?
Vraag een vrijblijvende offerte aan of stuur ons uw contactgegevens voor een gratis en vrijblijvend gesprek. Onze sales engineers nemen dan binnen maximaal 1 tot 2 werkdagen contact met u op.
Product downloaden
Praat met onze experts
Niet precies wat u zoekt? Wij bieden standaard sensoren, maar kunnen u ook helpen met voor u aangepaste sensoren of een volledig op maat gemaakte meetoplossing. Neem contact met ons op voor advies of prijzen.
Praat met een expertTechnische specificaties
| Specificaties | Waarde |
|---|---|
| Special: 3.175, 4 | |
| Combinable helicalohm pot. (matching shaft length of 25mm) | 10HP, 25HP, 12HP, 12HHP, 12HPC |
| Lock device | Yes |
| Mass (approx. g) | 15 |
| Matching shaft dia. (mm) | Standard: 3 |
| Max. number of turns-counting | 10 |
| Model no | MF10-15B |
| Operating temp. range | -30ºC ~ +60ºC |
| Patented flexible coupling | Yes |
Gerelateerde producten
Heeft u iets anders nodig?
10HP Multi-turn Rotatie Potentiometer
- Meetbereik 3, 5 of 10 slagen
- Kleine draadgewonden potentiometer
- Onafhankelijke lineariteit ±0,35% tot ±0,1%
12HP Multi-turn Rotatie Potentiometer
- Standaard weerstandsbereik: 100Ω tot 50kΩ (5turn), 100Ω tot 100kΩ (10turn)
- Maximaal praktische weerstandswaarde: 70kΩ (5turn), 150kΩ (10turn)
- Totale weerstandstolerantie: standaardklasse ±3%(H), precisieklasse ±1%(F)
25HP Multi-turn Rotatie Potentiometer
- Meetbereik 3, 5, 10, 15 of 20 slagen
- Standaard weerstandsbereik 100Ω-100kΩ
- Onafhankelijke lineariteit ±0,3% tot ±0,1%