MPM280P Flush diaphragm pressure sensor

---

Key features

• Pressure range: 0bar ~ 0.35bar...350bar
• Gauge, Absolute and Sealed gauge
• Constant current or Constant voltage
  power supply for option

---

About the MPM280P Flush diaphragm pressure sensor module

The MPM280P Flush diaphragm pressure sensor is connected via male threads and clamps. Pressure ports are G1/2 male, R1/2 male, NPT1/2 male, M20 x 1.5 male, and DN25 clamps with FKM or silicon O-ring seals. The product has an isolated structure and can measure the respective fluid medium.

Features

• Pressure range: 0bar ~ 0.35bar…350bar
• Gauge, Absolute and Sealed gauge
• Constant current or Constant voltage power supply for option
• Thread connection pressure: 0bar~0.35bar…350bar
• Clamp connection pressure: 0bar~0.35bar~35bar
• Hygienic structure optional(Ra<0.4μm)
• The negative pressure measurement is available, the lowest to around -1bar

Construction Performance

• Power supply: ≤2.0mA DC
• Electrical connection: φ0.5mm Kovar pin or 100mm silicon rubber flexible wires
• Common mode voltage output: 50% of input (typ.)
• Input impedance: 2.5kΩ~8kΩ
• Output impedance: 3.5kΩ~6kΩ
• Response (10%~90%): <1ms
• Insulation resistor: 100MΩ@100V DC
• Overpressure: 2 times FS

Applications

• Industrial process control
• Level measurement
• Gas, Liquid pressure measurement
• Liquid pressure system and Switch
  Refrigeration equipment and Airconditioner
• CIP or SIP online cleaning or sterilization system

---