NM2-IP-4L Tilt Measuring System
Dual axis tilt measuring system
Key features
- Measuring range ±3° up to ±60° or 0 - 90° per axis
- Accuracy ±0,1° (up to ± 15°), 0,5% of measuring range (up to ±60°)
- Analogue output 0 … (±)10 V or 0(4) … 20 mA (4-wire-technology)
- Supply voltage 10 … 18 VDC or 18 … 30 VDC
About the NM2-IP-4L Tilt Measuring System
The dual axis industrial tilt measuring system NM2-IP-4L is the combination of a non-contact inclination sensor AccuStar®-EA and sensor adapted electronics. The measuring system is designed for precise tilt measurement in X- and Y-axis and intended for ground assembly. Available tilt measuring ranges are ±3° to ±60°. The electrical wiring is realized in 4-wire-technology. For further evaluation of the measured inclination there are different standard analogue output signals per axis available, depending on the ordered type.
The tilt measuring system is built into a robust EMC-safe die-cast aluminium enclosure (IP66), which is well suited for applications in rough and industrial environments.
Do you need this sensor for your next project?
Request a no-obligation quote or send us your contact details for a free, no-obligation consultation. Our sales engineers will then contact you within a maximum of 1 to 2 working days.
Product downloads
Talk to our experts
Not exactly what you are looking for? We offer standard sensors, but can also help you with sensors adapted for you or a fully customised measurement solution. Contact us for advice or pricing.
Talk to an expertTechnical Specifications
| Specification | Value |
|---|---|
| Accuracy at 23°c | Up to ±15°: ±0,1°, Up to ±60°: 0,5% of measuring range, Up to ±65°: on request |
| Analogue output / burden | 0 - 10 V / ±10 V, max. 1 mA (short-time short-circuit proof) 0 - 20 mA, 4 - 20 mA, max. 500 Ω |
| Cross-sensitivity | < 1% up to ±60° |
| Dimensions (w x h x d) | 160 x 91 x 160 mm (without EMC cable glands) |
| Electrical connection | M16 x 1,5 EMC cable glands on internal spring-cage terminal blocks |
| Enclosure | EMC-safe aluminium die-cast enclosure |
| Frequency range (-3 db) | 2 Hz |
| Number of measuring axis | 2 |
| Power consumption | ca. 4 W |
| Preferred measuring range | ±3°, ±5°, ±10°, ±15, ± 20, ±30, ±45°, ±60° other measuring ranges on request |
| Protection class | IP66 |
| Supply voltage | 10 - 18 VDC*, 18 - 30 VDC*, electronic is protected against voltage reversal |
| Temperature, operating | -20 - +60 °C |
| Temperature, storage | -20 to +60 °C |
| Voltage insulation between supply voltage and analogue output | Galvanic isolation between supply voltage and analogue output, 200 V, higher voltage insulation on request |
| Weight | 2.300 g |
Related products
Need something else?
NSS1-IP Tilt Measuring System
- Measuring range ±3° up to ±60° or 0 to 90°
- Switching accuracy max. 0,5%
- With 2 switching contacts
NSS2-M2-IP Tilt Measuring System
- Measuring range ±3° up to ±10°
- With 2 switching contacts per axis
- Robust EMC-safe aluminium enclosure IP66
NSZ1-IP Tilt Measuring System
- Measuring range ±3° up to ±60° or 0 to 90°
- With 2 switching contacts & switching delay
- For rough and industrial environments