P603 Inductive Inclination Sensor
Affordable, durable, high-accuracy tilt sensor designed for industrial and scientific feedback applications
Key features
- Non-contacting inductive technology to eliminate wear
- Angle set to customer’s requirement
- Compact and self-contained
- High accuracy and stability
- High durability and reliability
- Sealing to IP67
About the P603 Inductive Inclination Sensor
The P603 is an affordable, durable, high-accuracy tilt sensor designed for industrial and scientific feedback applications. The P603 is supplied with the output calibrated to the angle required by the customer, between 15 and 160 degrees. The sensor provides a linear output characteristic with angle of deflection. There is a machined registration mark to identify the calibrated mid point.
It is particularly suitable for OEMs seeking good sensor performance for arduous applications such as industrial machinery where cost is important.
Overall performance, repeatability and stability are outstanding over a wide temperature range. Electrical connections to the sensor are made via an industrial standard 4-pin M12 connector, with limited rotational capability to facilitate cable routing.
The sensor has a rugged stainless steel body and anodised aluminum mounting flange. The flange has two 4.5mm by 30 degree wide slots on a 48mm pitch to simplify mounting and position adjustment. The P603 offers a range of electrical options. Sealing is to IP67 and full EMC protection is built in.
As a leading supplier of linear, rotary, tilt and intrinsically safe position sensors, Althen has the expertise to supply a sensor to suit a wide variety of applications.
Do you need this sensor for your next project?
Request a no-obligation quote or send us your contact details for a free, no-obligation consultation. Our sales engineers will then contact you within a maximum of 1 to 2 working days.
Product downloads
Talk to our experts
Not exactly what you are looking for? We offer standard sensors, but can also help you with sensors adapted for you or a fully customised measurement solution. Contact us for advice or pricing.
Talk to an expertTechnical Specifications
| Specification | Value |
|---|---|
| Body diameter | 35 mm |
| Body length (to seal face) | 44 mm standard, 50 mm buffered |
| Damping ratio | 0.2:1 (0.6 nom at 25°C) |
| Independent linearity/hysterisis (combined error) | <±0.25° |
| Noise | <0.02% FSO |
| Output | 0.5 to 4.5 V DC ratiometric, 0.5 to 4.5 V DC, ± 5V DC, ± 10V DC, 0.5 to 9.5 V DC, 4 - 20mA |
| Resolution | Infinite |
| Response time | 250 ms at 20°C typical |
| Temperature coefficient | <±0.01%/°C Gain & <±0.01%FS/°C Offset |
Related products
Need something else?
500 Self-Leveling Borehole Tiltmeter (Lily)
- Resolution up to 5 nanoradians
- For depths to 3500 meters.
- RS-232 or RS-422 Output