Contact us
  1. Althensensors
  2. Sensors
  3. Weighing sensors and load cells
  4. Single point load cells
  5. ALL Single Point Load Cell

ALL Single Point Load Cell

For platforms 250 x 350mm

3D Stepfile viewer

Benefit from

  • Realistic representation and better visualisation of space
  • Early detection of installation problems
  • Valuable data for subsequent processes
  • Improvement of technical documentation
 View technical specifications

Key features

  • Capacity: 3, 5, 10, 15, 20, 30, 50kg
  • Combined error ≤ ±0.02% (0.017% C4; 0.014% C5)
  • Aluminium alloy
  • Protection class IP65

General information


The ALL platform load cell is suitable for series use in weighing and batching systems, level measurement equipment and general force measurement systems where accurate measurements are required at low cost.


Features

  • Measuring range: 3, 5, 10, 15, 20, 30, 50kg
  • Aluminum alloy
  • Combined error: ≤±0.02% (0.017% C4; 0.014% C5).
  • Protection class: IP65
  • Approved according to OIML R60 C3, optional C4 and C5.

Options

  • ATEX approval Ex II 1GD (zone 0-1-2-20-21-22)
  • OIML R60 C4
  • OIML R60 C5
  • Stainless steel bracket

Safety notice:
When used as a tensile force transducer, it is essential to install additional safety measures such as catch straps, catch chains, etc., so that the load is absorbed in the event of a breakage of the transducer, which can never be completely ruled out.

Do you need this sensor for your next project?

Request a no-obligation quote or send us your contact details for a free, no-obligation consultation. Our sales engineers will then contact you within a maximum of 1 to 2 working days.

Request a quotation

Always the right sensor solution.

  • Free and independent advice for your application
  • Tailor-made offer
  • Development of standard and customised solutions
  • Fast response time

ALL Single Point Load Cell

 Talk to an expert

Talk to our experts

Not exactly what you are looking for? We offer standard sensors, but can also help you with sensors adapted for you or a fully customised measurement solution. Contact us for advice or pricing.

Talk to an expert

Technical Specifications

Specification Value
Compensated temperature range -10 °C / +40 °C
Creep at nominal load in 30 minutes 0.015%
Deflection at nominal load 0.5 mm
Input resistance 409 Ω ±6
Insulation resistance ≥5000 MΩ
Max supply voltage without damage 18 V
Measurement range 3, 5, 10, 15, 20, 30, 50kg
Operating temperature range -35 °C / +65 °C
Output resistance 350 Ω ±3
Rated output 2 mV/V ±10%
Safe overload (% of full scale) 150%
Temperature effect on span 0.0014% °C
Temperature effect on zero 0.0017% °C
Ultimate overload (% of full scale) 300%
Zero balance ≤ ±2%