Utmana oss
  1. Althensensors
  2. Sensorer
  3. Kraftsensorer
  4. Anpassade Lastceller för fordon
  5. ALF321 Gear Shift Force Sensor

ALF321 Gear Shift Force Sensor

Measures gear lever forces required to achieve gear selection

3D-tittare för stegfiler

Fördelar med

  • Realistisk representation och bättre visualisering av utrymmet
  • Tidig upptäckt av installationsproblem
  • Värdefulla data för efterföljande processer
  • Förbättring av teknisk dokumentation
 Se tekniska specifikationer

Nyckelfunktioner

  • Gear lever actuation forces measured in 3 axes
  • User friendly pure calibrated outputs for each axis
  • Designed for hand or robotic actuation
  • In car ergonomic replication
  • Easily customized

About the ALF321 Gear Shift Force Sensor

The ALF321 gear shift loadcell measures gear lever forces required to achieve gear selection. An ergonomically designed gear knob senses the force from a human hand or a mechanical actuator. The three axis force components are represented by three pure loadcell output signals. The gear shift loadcell is supplied calibrated and ready to use, no in-situ calibration or mathematical computation is required.

Easy fitment is achieved with mechanical axis referencing and simple attachment to a male thread or adapter.

The gear shift loadcell, like all our automotive products, can be produced for environmental test chamber temperature requirements of -40 to 80°C.

We are happy to design variants of this loadcell to meet your specific requirements.

The standard range is manufactured in aluminium.

Notes
1. AL = Applied load.
2. RL = Rated load.
3. Temperature coefficients apply over the compensated range.
4. Values apply to all axes unless otherwise specified.

Connections
The ALF321 is fitted with 2 metres of PVC insulated 12 core screened cable type 7-1-12C. The screen is not connected to the loadcell body.

Behöver du den här sensorn till ditt nästa projekt?

Begär en offert eller lämna dina uppgifter för att få mer information från en av våra experter.

Begär en offert

  • Snabb respons från en teknisk försäljningsingenjör
  • Skräddarsytt erbjudande
  • Kostnadsfri teknisk rådgivning

ALF321 Gear Shift Force Sensor

 Prata med en expert

Få det på ditt sätt

Inte exakt vad du letar efter? Vi erbjuder standardsensorer, men kan också hjälpa dig med en komplett skräddarsydd lösning. Kontakta oss för rådgivning eller budgetprissättning.

Prata med en expert

Tekniska specifikationer

Specifikation Värde
Bridge resistance x & y axis 350 Ω
Creep - 20 minutes ±0.1% AL
Excitation voltage - maximum 10V
Excitation voltage - recommended 10V
Hysteresis ±0.5% RL
Insulation resistance - minimum at 50vdc 500 MΩ
Load direction Bi-directional
Maximum cross talk 3% RL
Measurement range 200N
Non-linearity - terminal ±0.5% RL
Overload - safe 50% RL
Overload - ultimate 100% RL
Rated output - nominal 1.0mV/V
Repeatability ±0.02% RL
Structural stiffness - nominal - x & y axis 2.0 x 10^6 N/m
Temperature effect on rated output per °c ±0.005% AL
Temperature effect on zero load output per °c ±0.01% RL
Temperature range - compensated -10 to +50°C
Temperature range - safe -10 to +80°C
Weight - nominal (excluding cable) 150g
Z axis 1.3 x 10^6 N/m
Z axis 700 Ω
Zero load output ±4% RL

Relaterade produkter

Behöver du något annat?

ALF319 Hand Brake Force Sensor

  • Measuring range: 0 to 1 kN
  • Measurement of an ergonomic force
  • Good extraneous load rejection
Datablad Visa produkt

ALF322 Accelerator Pedal Force Sensor

  • Measuring range: 0 to 250 N
  • Off center loading compensation
  • Lightweight aluminium alloy construction
Datablad Visa produkt

ALF323 Clutch Pedal Force Sensor

  • Measuring rang: 0 to 1 kN
  • Non-linearity: 0.05 % RL
  • Removable loading plate
Datablad Visa produkt