ALF323 Clutch Pedal Force Sensor
Compact, high accuracy low profile loadcell for measuring clutch pedal application forces
Nyckelfunktioner
- Off center loading compensation
- Simple cable tie or screw fixing
- Anti-slip rubber pad
- Removable loading plate
- Output rationalized to 2mV/V
- Lightweight aluminium alloy construction
About the ALF323 Clutch Pedal Force Sensor
The ALF323 is a compact, high accuracy low profile loadcell for measuring clutch pedal application forces. The loadcell is robust in construction with a maximum force range of 1kN (100kgf). Its multi-hole fixing allows simple attachment to any shape pedal using screws or cable ties. The low profile design maintains the clutch pedals ergonomic geometry. Low mass aluminium alloy construction reduces the mass influence upon the clutch pedal in dynamic testing.
If you require other force ranges the ALF304 or ALF322 may be suitable.
We are happy to design variants of this loadcell to meet your specific requirements.
The standard range is manufactured in aluminium alloy.
Notes
1. AL = Applied load.
2. RL = Rated load.
3. Temperature coefficients apply over the compensated range.
Connections
The ALF323 is fitted with 2 metres of flexible polyurethane jacketed 4 core screened cable.
Excitation + = Red, Excitation - = Blue, Signal + = Yellow, Signal - = Green, Screen = Orange.
The screen is not connected to the loadcell body.
When this loadcell is rationalised the resistors are housed in a capsule located in the loadcell cable 100mm from the free end. Capsule dimensions are Ø10mm by 57mm.
Behöver du den här sensorn till ditt nästa projekt?
Begär en offert eller lämna dina uppgifter för att få mer information från en av våra experter.
Produktnedladdningar
Få det på ditt sätt
Inte exakt vad du letar efter? Vi erbjuder standardsensorer, men kan också hjälpa dig med en komplett skräddarsydd lösning. Kontakta oss för rådgivning eller budgetprissättning.
Prata med en expertTekniska specifikationer
| Specifikation | Värde |
|---|---|
| Bridge resistance | 700 Ω |
| Creep - 20 minutes | ±0.05% AL |
| Excitation voltage - maximum | 20V |
| Excitation voltage - recommended | 10V |
| Hysteresis | ±0.05% RL |
| Inclined load error - concentric at 3° | ±0.25% RL |
| Insulation resistance - minimum at 50vdc | 500 MΩ |
| Load direction | Compression |
| Measurement range | 1kN |
| Non-linearity - terminal | ±0.05% RL |
| Overload - safe | 50% RL |
| Overload - ultimate | 200% RL |
| Rated output - rationalised | 2.0mV/V |
| Rationalisation tolerance | ±0.1% RL |
| Repeatability | ±0.02% RL |
| Sealing | IP65 |
| Sideload - safe | 100% RL |
| Structural stiffness | 1.5 x 10^7 N/m |
| Temperature effect on rated output per °c | ±0.005% AL |
| Temperature effect on zero load output per °c | ±0.005% RL |
| Temperature range - compensated | -10 to +50°C |
| Temperature range - safe | -10 to +80°C |
| Weight - nominal (excluding cable) | 80g |
| Zero load output | ±10% RL |
Relaterade produkter
Behöver du något annat?
ALF305 Seat Belt Tension Force Sensor
- Measuring range: 0 to 16 kN
- Measures seat belt tension forces
- Minimal mass, stress and deflection
FN2317 Force Sensor for Automotive
- Measuring range: 0 to 500 N or 1 kN
- High accuracy: ±0.5 % F.S.
- Compact, rugged and easy to mount design