ALF325 Bending Beam Force Sensor
Designed and built to meet the needs of machine designers
Nyckelfunktioner
- Full load range: 50-500N
- Smaller/larger ranges possible
- High accuracy web tension loadcell
- Overload-stop
- Rated output: 1,2mV/V nominal
- Non-lin./hysteresis: 0.03/0.03% RL
- High structural stiffness
- Very high precision
- Precision alignment tool facility
About the ALF325 Bending Beam Force Sensor
This high precision web tension loadcell is designed and built to meet the needs of machine designers, installation fitters and end users by the incorporation of alignment features with maximum flexibility. The high performance of this loadcell is not compromised by the relatively large errors that can be produced by imprecise installation.
There is a maximum supported moment for each range. Standard ALF325 loadcells can withstand full rated load at half a metre full cantilever.
Additional features ALF325
- Standard bearing mounting
- Mounting foot provision
- Optional mounting flange
Behöver du den här sensorn till ditt nästa projekt?
Begär en offert eller lämna dina uppgifter för att få mer information från en av våra experter.
Produktnedladdningar
Få det på ditt sätt
Inte exakt vad du letar efter? Vi erbjuder standardsensorer, men kan också hjälpa dig med en komplett skräddarsydd lösning. Kontakta oss för rådgivning eller budgetprissättning.
Prata med en expertTekniska specifikationer
| Specifikation | Värde |
|---|---|
| Bridge resistance | 350Ω |
| Creep - 20 minutes | ±0.05% AL |
| Excitation voltage - maximum | 10V |
| Excitation voltage - recommended | 10V |
| Hysteresis | ±0.03% RL |
| Insulation resistance - minimum at 50vdc | 500 MΩ |
| Load direction | Compression |
| Measurement range | 50N, 100N, 200N, 500N |
| Non-linearity - terminal | ±0.03% RL |
| Overload - safe | 50% RL |
| Overload - ultimate | 200 % RL |
| Rated output - nominal | 1.2mV/V |
| Rated output - rationalised | 1.0mV/V |
| Rationalisation tolerance | ±0.1% RL |
| Repeatability | ±0.01% RL |
| Temperature effect on rated output per °c | ±0.005% AL |
| Temperature effect on zero load output per °c | ±0.01% RL |
| Temperature range - compensated | -10 to +50°C |
| Temperature range - safe | -10 to +80°C |
| Weight - nominal (excluding cable) | 380g |
| Zero load output | ±4% RL |
Relaterade produkter
Behöver du något annat?
ALF268 Shear Beam Force Sensor
- Measuring range: ~5 kN to ~160 kN
- Sealed to IP65
- For process weighing in harsh environments
ALF301 Low Range Stylus Force Sensor
- Measuring range: 1 or 3 N
- With integral overload stops
- Easy mounting in existing systems