XFL225D Miniature Force Sensor
Very flat miniature force sensor
Nyckelfunktioner
- Load washer model
- Flat sensor
- Inside hole 8mm or flat surface
- Temperature compensated
About the XFL225D Miniature Force Sensor
The XFL225D series is a very flat miniature load cell with a temperature compensation module integrated into the output cable.
The sensing element is fitted with a fully temperature compensated Wheatstone bridge equipped with high stability micro-machined silicon strain gages. The XFL225D is developed for measuring large full scale ranges up to 5000N; 1000 lbf and can withstand considerable overloads. It can measure strain during compression in static and dynamic applications. A strain relief spring strengthens the cable output. This sensor is available in a load washer model (the diameter of the hole is 8.2 mm) to measure bolt tightening forces.
Applications for XFL225D
- Strain table measurement
- Micro component assembly tools
- Screw and insert test benches
- Press fit monitoring
- Laboratory
Behöver du den här sensorn till ditt nästa projekt?
Begär en offert eller lämna dina uppgifter för att få mer information från en av våra experter.
Produktnedladdningar
Få det på ditt sätt
Inte exakt vad du letar efter? Vi erbjuder standardsensorer, men kan också hjälpa dig med en komplett skräddarsydd lösning. Kontakta oss för rådgivning eller budgetprissättning.
Prata med en expertTekniska specifikationer
Specifikation | Värde |
---|---|
Accuracy | ±1% of FS |
Diameter | 25mm [0.98”] |
Housing material | Stainless steel or aluminum |
Load direction | Compression |
Measurement range | 10N, 20N, 50N, 100N, 200N, 500N, 1kN, 2kN, 5kN |
Output signal | ±100 mV |
Sealing | IP50 |
Relaterade produkter
Behöver du något annat?
XFTC300 Miniature Force Sensor
- Measuring range: ~2 N to ~2 kN
- High-level output options available
- Small design easy to mount
XFTC301 Miniature Force Sensor
- Measuring range: ~500 N to ~10 kN
- Optimal performance at low ranges
- Very small design & high stiffness
XFTC302 Miniature Force Sensor
- Measuring range: up to 5 or 10 kN
- Excellent temperature stability
- Optional protection rating improvement