M138 Linear Inductive Position Sensor
Spring loaded pushrod option available
Nyckelfunktioner
- Travel set to customer's requirement
- Compact 19mm diameter body
- High durability and reliability
- High accuracy and stability
- Sealing to IP67
- Intrinsically safe for Mining to: Ex I/II M1/1GD
- Non-contacting inductive technology to eliminate wear
About the M138 Linear Inductive Position Sensor
The M138 is designed for a wide range of industrial applications and is ideal for OEMs seeking good sensor performance in situations where a small diameter, short-bodied sensor is required for operation in hazardous areas.
The incorperated electronics system is ATEX / IECEx approved for use in potentially explosive gas/vapour, dust atmospheres and mining environments.
The unit is compact and space-efficient, being responsive along almost its entire length.
Overall performance, repeatability and stability are outstanding over a wide temperature range. It provides a linear output proportional to displacement. Each unit is supplied with the output calibrated to the travel required by the customer, from 51mm to 100mm and with full EMC protection built in.
The sensor has a compact 19 mm diameter stainless steel body, is easy to install and set up. The stainless steel mounting flange has two 3.2mm by 30 degree wide slots on a 25 mm pitch. The stainless steel plunger can be supplied free or captive, with female M4 thread, or springloaded with a ball end. Environmental sealing is to IP67.
As a leading supplier of linear, rotary, tilt and intrinsically safe position sensors, Althen has the expertise to supply a sensor to suit a wide variety of applications.
Behöver du den här sensorn till ditt nästa projekt?
Begär en offert eller lämna dina uppgifter för att få mer information från en av våra experter.
Få det på ditt sätt
Inte exakt vad du letar efter? Vi erbjuder standardsensorer, men kan också hjälpa dig med en komplett skräddarsydd lösning. Kontakta oss för rådgivning eller budgetprissättning.
Prata med en expertTekniska specifikationer
Specifikation | Värde |
---|---|
Body diamete | 19mm |
Frequency response | >10KHz (-3dB) |
Independent linearity | ±0.1% to ±0.25% |
Measurement range | Up to 100mm |
Output signal | 0.5-4.5VDC ratiometric |
Sealing | IP67 |
Relaterade produkter
Behöver du något annat?
X100 Linear Inductive Position Sensor
- Intrinsically safe for Gas to: Ex II 1G
- Sealing to IP65/IP67 as required
- Travel set to customer’s requirement
X101 Linear Inductive Position Sensor
- ATEX certified
- Measurement range: Up to 800mm
- Independent linearity: ±0.25% to ±0.5%
X103 Linear Inductive Position Sensor
- Intrinsically safe for Gas to: Ex II 1G
- Sealing to IP65/IP67 as required
- Travel set to customer’s requirement