P111 Linear Inductive Position Sensor
LIPS P111 rugged linear position sensor
Nyckelfunktioner
- Compact and self-contained
- Travel set to customer’s requirement
- High durability and reliability
- High accuracy and stability
- Sealing to IP65/IP67 as required
- Non-contacting inductive technology to eliminate wear
About the P111 - Rugged stand-alone Linear Inductive Position Sensor
Our P111 LIPS (Linear Inductive Position Sensor) is a heavy-duty version of the P101 sensor with a stronger 12.7mm push rod, recommended for applications where vibration is an issue or there is a need for longer travel sensors, mounted horizontally, and supported between rod eyes.
It remains an affordable, durable, high-accuracy position sensor designed for industrial and scientific feedback applications. The unit is highly compact and spaceefficient, being responsive along almost its entire length.
The P111 provides a linear output proportional to displacement. Each sensor is supplied with the output calibrated to the travel required by the customer, from 50 to 600mm and with full EMC protection built in.
The sensor is very robust, the body and push rod being made of stainless steel for long service life and environmental resistance. It is particularly suitable for OEMs seeking good sensor performance for arduous applications such as industrial machinery where cost is important. Overall performance, repeatability and stability are outstanding over a wide temperature range.
The sensor is easy to install with mounting options including M8 rod eye bearings and body clamps. The push rod can be supplied free or captive, with female M8 thread, an M8 rod eye, or dome end, Captive push rods can be sprung loaded, in either direction, on sensors up to 250mm of travel.
The P111 also offers a wide range of mechanical and electrical options, environmental sealing is to IP65 or IP67, depending on selected cable or connector options.
As a leading supplier of linear, rotary, tilt and intrinsically safe position sensors, Althen has the expertise to supply a sensor to suit a wide variety of applications.
Behöver du den här sensorn till ditt nästa projekt?
Begär en offert eller lämna dina uppgifter för att få mer information från en av våra experter.
Produktnedladdningar
Få det på ditt sätt
Inte exakt vad du letar efter? Vi erbjuder standardsensorer, men kan också hjälpa dig med en komplett skräddarsydd lösning. Kontakta oss för rådgivning eller budgetprissättning.
Prata med en expertTekniska specifikationer
Specifikation | Värde |
---|---|
Frequency response | 10kHz or 300Hz |
Independent linearity | ±0.25% to ±0.5% |
Measurement range | Up to 800mm |
Sealing | IP65 or IP67 |
Relaterade produkter
Behöver du något annat?
P112 Linear Inductive Position Sensor
- Measurement range 0 to 50 mm
- For gauge head positioning measuring
- Long service life & environmental resistance
P117 Linear Inductive Position Sensor
- Measuring range: 0 to 350 mm
- IP67 environmental sealing
- Compact 19mm diameter body
P133 Linear Inductive Position Sensor
-
Measurement range: Up to 100mm
- IP65 or IP67 sealing available
-
Independent linearity: ±0.25%