LHK15-30 Linear Magnetic Hall Sensor
Special specifications such as with spring return device are available
Nyckelfunktioner
- Hall effect IC
- With front and rear extended
- Operating temperature range: -40°C +105°C
- Drift at center position < ±0.5% Vout-FS
- Best suitable for applications to detect the position of linear-motion displacement
About the LHK15-30 Linear Magnetic Hall Sensor
The LHK15-30 is a long-life, linear motion contactless potentiometer with stroke 30mm. Dual output and dual independent output are available.
Special specifications available
- With spring return device
- Special machining on the shaft
- Special output (cross, parallel, dual independent output)
- PWM output
- Low current consumption in slow mode
Behöver du den här sensorn till ditt nästa projekt?
Begär en offert eller lämna dina uppgifter för att få mer information från en av våra experter.
Produktnedladdningar
Få det på ditt sätt
Inte exakt vad du letar efter? Vi erbjuder standardsensorer, men kan också hjälpa dig med en komplett skräddarsydd lösning. Kontakta oss för rådgivning eller budgetprissättning.
Prata med en expertTekniska specifikationer
Specifikation | Värde |
---|---|
Dual output/Dual independent output: Max. 30mA | |
Applied voltage | 5 VDC±10% |
Current consumption | Single output: Max. 15mA |
Drift at center position | Below ±0.5% Vout-FS |
Effective output | 10%±3%~90%±3%Vin |
Electrical stroke | Approx. 30mm±0.5mm |
Friction | Within 0.6N (60gf) |
Independent linearity tolerance | ±0.5% - FS |
Load resistance | 10kΩ min. |
Mass | Approx. 44g |
Mechanical stroke | Approx. 34mm |
Operating temperature range | -40°C +105°C |
Output temperature characteristic | Below ±0.8% Vout -FS |
Stopper strength | Approx. 20N (2kgf) |
Storage temperature range | -40°C +105°C |
Relaterade produkter
Behöver du något annat?
LSM22 Linear Magnetic Hall Sensor
- Measurement range 14 mm to 34 mm
- Resistance value: 10 kΩ to 500 kΩ
- Body dimensions (mm): Ø22x54