13FLP Series Linear Potentiometer
Conductive Plastic Model with front and rear extended shaft
Nyckelfunktioner
- Miniature conductive plastic model
- Measurement range: between 12mm and 100mm
- Resistance value: between 500Ω to 20kΩ
- Linearity tolerance: ±2%, ±1.5%, ±1%, ±0.7%, ±0.5% or ±0.3%
- Various body dimensions available
About the 13FLP Series Linear Potentiometer
The 13FLP is a low-cost item with side turret terminals and a thread at the end of the shaft.
In the 13FLP series we have the 13FLP12A, 13FLP25A, 13FLP50A and 13FLP100A available.
Body dimensions (mm): 11x13x(depends on the type of linear potentiometer):
- 13FLP12A: stroke 12 mm
- 13FLP25A: stroke 25 mm
- 13FLP50A: stroke 50 mm
- 13FLP100A: stroke 100 mm
Special Specifications Available
Spring return device mounted on the shaft (friction is referred as within table), special machining on the shaft, wirewound resistive element type (13LP series). In case of 13FLP series with spring return device, please note the following: The spring return device is mounted on the outside shaft, of which dimensions are as the table.
For more specifications please contact us.
Behöver du den här sensorn till ditt nästa projekt?
Begär en offert eller lämna dina uppgifter för att få mer information från en av våra experter.
Produktnedladdningar
Få det på ditt sätt
Inte exakt vad du letar efter? Vi erbjuder standardsensorer, men kan också hjälpa dig med en komplett skräddarsydd lösning. Kontakta oss för rådgivning eller budgetprissättning.
Prata med en expertTekniska specifikationer
| Specifikation | Värde |
|---|---|
| Precision class: ±1.0%, ±0.7%, ±0.5%, ±0.3% | |
| Contact resistance variation | Within 2% C.R.V. |
| Dielectric strength | 1 minute at 500V.A.C. |
| Electrical stroke | 12.7±0.5mm, 25.4±0.5mm, 50.8±0.5mm, 101.6±0.5mm |
| Friction | Within 0.5N(50gf), Within 1.0N (100gf) |
| Independent linearity tolerance | Standard class: ±2.0%, ±1.5%, ±1.0%, ±0.7% |
| Insulation resistance | Over 1.000MΩ at 500VDC |
| Mass | Approx. 10g, approx. 15g, approx. 25g, approx. 35g |
| Output smoothness | Within 0.1% against input voltage |
| Power rating | 0.2W, 0.4W, 0.7W, 1.2W |
| Resolution | Essentially infinite |
| Standard resistance values | 500Ω, 1k, 2kΩ, 5kΩ, 10kΩ, 20kΩ |
| Stopper strength | ±400p.p.m./°C |
| Total resistance tolerance | ±20% |
Relaterade produkter
Behöver du något annat?
15FLP Series Linear Potentiometer
- Measurement range 15 mm and 30 mm
- Resistance value 500 Ω to 10 kΩ
- With front & rear extended shaft
18FLPA Series Linear Potentiometer
- Measurement range 15 mm and 100 mm
- Resistance value: 500 Ω to 20 kΩ
- Robust conductive plastic model
