NSS2-M2-IP Tilt Measuring System
Dual axis tilt switching system with 2 switching contacts per axis
Nyckelfunktioner
- Measuring range ±3° up to ±10°
- Switching accuracy max. 0,5% of measuring range
- Supply voltage 18 … 30 VDC
- Output: 2 potential-free switching contacts per axis (max. 30VDC/0,5A)
About the NSS2-M2-IP Tilt Measuring System
The dual axis industrial tilt switching system NSS2-M2-IP is the combination of two non-contact inclination
sensors and sensor adapted electronics. The measuring system is designed for precise tilt monitoring in X- and
Y-axis and intended for ground assembly. Available tilt measuring & monitoring ranges are ±3° to ±10°. °. By
using the build-in potentiometers, which can be seen after removing the case cover, the switching setpoints
can be adjusted as needed over the whole measuring range for both axis. The relays have potential-free
switching contacts (max. 30 VDC / 0.5 A).
The tilt measuring system is built into a robust EMC-safe die-cast aluminium enclosure (IP66), which is well
suited for applications in rough and industrial environments.
Behöver du den här sensorn till ditt nästa projekt?
Begär en offert eller lämna dina uppgifter för att få mer information från en av våra experter.
Produktnedladdningar
Få det på ditt sätt
Inte exakt vad du letar efter? Vi erbjuder standardsensorer, men kan också hjälpa dig med en komplett skräddarsydd lösning. Kontakta oss för rådgivning eller budgetprissättning.
Prata med en expertRelaterade produkter
Behöver du något annat?
NSZ1-IP Tilt Measuring System
- Measuring range ±3° up to ±60° or 0 to 90°
- With 2 switching contacts & switching delay
- For rough and industrial environments
ASC TSF-360-CAN Digital Fluidic Tilt Sensor
- Measurement Range: 360°
- Accuracy: <0.15°
- Resolution: <0.01°